Epson 570e Product Information Guide - Page 2

Optional Interface Cards, Printer Specifications, Mechanical - lq dot matrix printer

Page 2 highlights

EPSON LQ-570e Optional Interface Cards You can install an optional interface card to supplement your printer's built-in parallel interface and provide added network compatibility. The EPSON interface cards in the table below are compatible with your printer. Model number C823051 C823071 C823121 C823141 C823151 C823451 C823622 C823642 Card type Serial Type B interface card 32KB serial Type B interface card LocalTalk interface card Coax Type B interface card Twinax Type B interface card IEEE-1284 (Type B bidirectional) parallel interface card Type B Ethernet interface card for 10 Base 2 / 10 Base T Type B Ethernet interface card for 10/100 Base TX with AC adapter * If you install the C823051 optional serial interface card, be sure to set the transfer speed to one of the following: 300, 600, 1200, 2400, 4800, 9600, or 19200 bps. Printer Specifications Mechanical Printing method Emulation Printing speed 24-pin impact dot matrix EPSON ESC/P®2 and IBM 2390 Plus High-speed draft 400 cps at 10 cpi Draft 300 cps at 10 cpi 360 cps at 12 cpi 450 cps at 15 cpi Draft condensed 257 cps at 17 cpi 300 cps at 20 cpi LQ 100 cps at 10 cpi 120 cps at 12 cpi 150 cps at 15 cpi LQ condensed 171 cps at 17 cpi 200 cps at 20 cpi Printing direction Bidirectional logic seeking for text and graphics printing. Unidirectional text or graphics printing can be selected using software commands. Line spacing 1/6 inch or programmable in 1/360-inch increments Printable columns 80 columns (at 10 cpi) Resolution (maximum) Letter quality: 360 × 180 dpi Raster graphics: 360 × 360 dpi Interfaces 1 standard bidirectional, 8-bit parallel interface with IEEE-1284 nibble mode support, and 1 optional interface slot Paper feed methods Friction (front or top paper entry) Push tractor (rear paper entry) Pull tractor (front, bottom, or rear paper entry) Push and pull tractor (optional) High-capacity cut-sheet feeder (optional) Roll paper holder (optional) Paper feed speed Continuous 5 inches/second Intermittent 45 ms/line at 1/6-inch line spacing Paper capacity Optional high-capacity cut-sheet feeder up to 150 sheets of 22 lb (82 g/m2) paper up to 25 plain or bond envelopes up to 30 airmail envelopes up to 30 postcards Single-bin cut-sheet feeder up to 50 sheets of 22 lb (82 g/m2) paper The total thickness of the paper stack can be up to 0.20 inch (5 mm). Buffer 64KB 2 - EPSON LQ-570e 4/00

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

EPSON LQ-570e
2 -
EPSON LQ-570e
4/00
Optional Interface Cards
You can install an optional interface card to supplement your
printer’s built-in parallel interface and provide added network
compatibility. The EPSON interface cards in the table below
are compatible with your printer.
* If you install the C823051 optional serial interface card, be sure to
set the transfer speed to one of the following: 300, 600, 1200, 2400,
4800, 9600, or 19200 bps.
Printer Specifications
Mechanical
Model number
Card type
C823051
Serial Type B interface card
C823071
32KB serial Type B interface card
C823121
LocalTalk interface card
C823141
Coax Type B interface card
C823151
Twinax Type B interface card
C823451
IEEE-1284 (Type B bidirectional)
parallel interface card
C823622
Type B Ethernet interface card for
10 Base 2 / 10 Base T
C823642
Type B Ethernet interface card for
10/100 Base TX with AC adapter
Printing method
24-pin impact dot matrix
Emulation
EPSON ESC/P
®
2 and IBM 2390 Plus
Printing speed
High-speed draft
400 cps at 10 cpi
Draft
300 cps at 10 cpi
360 cps at 12 cpi
450 cps at 15 cpi
Draft condensed
257 cps at 17 cpi
300 cps at 20 cpi
LQ
100 cps at 10 cpi
120 cps at 12 cpi
150 cps at 15 cpi
LQ condensed
171 cps at 17 cpi
200 cps at 20 cpi
Printing direction
Bidirectional logic seeking for text and
graphics printing. Unidirectional text
or graphics printing can be selected
using software commands.
Line spacing
1/6 inch or programmable in
1/360-inch increments
Printable columns
80 columns (at 10 cpi)
Resolution (maximum) Letter quality: 360
×
180 dpi
Raster graphics: 360
×360
dpi
Interfaces
1 standard bidirectional, 8-bit parallel
interface with IEEE-1284 nibble mode
support, and 1 optional interface slot
Paper feed methods
Friction (front or top paper entry)
Push tractor (rear paper entry)
Pull tractor (front, bottom, or rear
paper entry)
Push and pull tractor (optional)
High-capacity cut-sheet feeder
(optional)
Roll paper holder (optional)
Paper feed speed
Continuous
5 inches/second
Intermittent
45 ms/line at 1/6-inch line spacing
Paper capacity
Optional high-capacity cut-sheet feeder
up to 150 sheets of 22 lb (82 g/m
2
)
paper
up to 25 plain or bond envelopes
up to 30 airmail envelopes
up to 30 postcards
Single-bin cut-sheet feeder
up to 50 sheets of 22 lb (82 g/m
2
)
paper
The total thickness of the
paper stack can be up to
0.20 inch (5 mm).
Buffer
64KB