Epson Artisan 730 Quick Guide - Page 23
Once you replace all the cartridges that need replacing, close the scanner to begin
View all Epson Artisan 730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
7. Insert the new cartridge into the holder and push it down until it clicks into place. 8. Once you replace all the cartridges that need replacing, close the scanner to begin charging the ink. This takes about 2 minutes. When you see a completion message on the display screen, ink charging is finished. Caution: Never turn off your product while ink is charging or you'll waste ink. If you see an ink replacement message on the LCD screen, press OK and press down all the cartridges securely. If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge. Note: If you replaced a cartridge while copying a document or photo, cancel printing and make sure your original is still placed correctly on the document table. Then copy your original again. Maintaining Your Product 23