Epson BrightLink 536Wi User Manual - Page 194
Solutions When the Interactive Pen Position Is Not Accurate
View all Epson BrightLink 536Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
• Press the Pen Mode button on the remote control to toggle between PC Interactive and PC Free Annotation modes. Parent topic: Solving Interactive Problems Related concepts Pen Calibration Related references Projector Setup Settings - Extended Menu Solutions When the Interactive Pen Position Is Not Accurate If the pen position is not the same as the mouse pointer, try the following solutions: • Make sure you have calibrated the system. Try manual calibration. • Try adjusting the pen operation area. • If you use the E-Zoom + button on the remote control to enlarge the image, the pen position is not accurate. When you return the image to the original size, the position should be correct. • In PC Interactive mode (in the Extended menu), turn off Auto Adjust Pen Area and select Manual Adj. Pen Area. • Try changing the computer's resolution to 1280 × 800. • Select Reset All from the Reset menu to restore the projector settings to their default values. Parent topic: Solving Interactive Problems Related concepts Pen Calibration Related references Projector Reset Options - Reset Menu Projector Setup Settings - Extended Menu Related tasks Adjusting the Pen Operation Area Solutions When the Interactive Pens Are Slow or Difficult to Use If the pens are difficult to use or respond too slowly, try the following solutions: • For easier operation, hold the pen perpendicular to the projection surface. 194