Epson BrightLink 536Wi Installation Guide - Short-Throw Wall Mount (ELPMB45) - Page 24
Assemble the wall mount, BrightLink 536Wi projectors.
View all Epson BrightLink 536Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2. Assemble the wall mount 1. Attach the adjustment unit to the arm unit. 2. Partially tighten the M4 × 12 mm hexagon socket head cap bolt and M8 × 16 mm hexagon socket head cap bolt using the hexagonal wrenches (M4 and M8). q You need to change the position of the adjustment unit screws (B) if you are using the wall mount with a product other than the PowerLite 520/525W/530/535W or BrightLink 536Wi projectors. Arm unit M4 × 12 mm hexagon socket head cap bolt M8 × 16 mm hexagon socket head cap bolt Adjustment unit 3. Attach the arm plate using a hexagonal wrench (M8) and four M8 × 16 mm hexagon socket head cap bolts. Tighten the screws firmly. Arm plate M8 × 16 mm hexagon socket head cap bolt (×4) 24
24
2.
Assemble the wall mount
1.
Attach the adjustment unit to the arm unit.
2.
Partially tighten the M4 × 12 mm hexagon socket head cap bolt and M8 × 16 mm hexagon socket
head cap bolt using the hexagonal wrenches (M4 and M8).
3.
Attach the arm plate using a hexagonal wrench (M8) and four M8 × 16 mm hexagon socket head
cap bolts. Tighten the screws firmly.
q
You need to change the position of the adjustment unit screws (B) if you are using the
wall mount with a product other than the PowerLite 520/525W/530/535W or
BrightLink 536Wi projectors.
Arm unit
Adjustment unit
M8 × 16 mm hexagon socket head cap bolt
M4 × 12 mm hexagon socket head cap bolt
Arm plate
M8 × 16 mm hexagon
socket head cap bolt (×4)