Epson C094001 User Manual - Page 47
Make sure your paper has a clean, straight loading edge. Open
View all Epson C094001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using Continuous Paper 4. Slide the left sprocket approximately 12 mm (0.5 inch) from the far left position (Use the alignment marks on the printer case.) Push the lever back to lock it in place. Then slide the right sprocket unit to match the width of your printer, but do not lock it. Move the paper support so it is midway between the sprocket units. 12 mm (0.5 inch) 5. Make sure your paper has a clean, straight loading edge. Open the sprocket covers and fit the first four holes of the paper over the sprocket pins. 2-14 Paper Handling
Using Continuous Paper
4.
Slide the left sprocket approximately 12 mm (0.5 inch) from the
far left position (Use the alignment marks on the printer case.)
Push the lever back to lock it in place. Then slide the right
sprocket unit to match the width of your printer, but do not lock
it. Move the paper support so it is midway between the sprocket
units.
12 mm (0.5 inch)
5.
Make sure your paper has a clean, straight loading edge. Open
the sprocket covers and fit the first four holes of the paper over
the sprocket pins.
2-14
Paper Handling