Epson C094001 User Manual - Page 66
TEAR OFF, Character table, length, Using the Printer
View all Epson C094001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Default-Setting Mode Tear off When you use continuous pap& with the front or rear push tractor, you can use the tear-off feature. When the auto tear off is valid, the printer automatically performs the tear-off feature. The printer automatically feeds the paper perforation to the tear-off position at the edge of the printer cover after you complete a print job. You can then easily tear off the printed page. When the printer again receives data, it automatically feeds the paper backward to the top-of-form position and starts printing. When the auto tear off is invalid, you must perform the tear-off function manually by pressing the TEAR OFF button. See Tear Off later in this chapter for details. Auto line feed When this feature is valid, each carriage return (CR) code is always accompanied by a line feed (LF) code. If your text lines overprint each other, set auto line feed to valid. If your text lines are mistakenly double spaced, set auto line feed to Depends on interface. Character table Character tables contain the characters and symbols used in different languages. Your printer includes a wide variety of character tables. You can check the character tables available with your printer by printing the quick reference in the Group 2 default-setting mode. See the Appendix for specific characters in these character tables. You can also select character tables with software commands. See Chapter 8. Page length You can set the page length to 11, 12, 8.5, 70/6 (A4), 5.5, 7, 17, 14, 8, 6, 4, 3.5, or 3 inches. Using the Printer 3-7