Epson C11C294131BZ Product Information Guide
Epson C11C294131BZ - LX 300+ B/W Dot-matrix Printer Manual
 |
View all Epson C11C294131BZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson C11C294131BZ manual content summary:
- Epson C11C294131BZ | Product Information Guide - Page 1
: EPSON NLQ Roman EPSON NLQ Sans Serif EPSON Draft to 24 lb) Bond paper, plain paper, recycled paper Single sheets (manual insertion): Width Length Thickness Weight Quality 182 to 257 mm (7.2 to side-crimped multi-part forms, raise the paper guide to keep the printing position accurate. t When - Epson C11C294131BZ | Product Information Guide - Page 2
the printer; they can easily peel off the backing and jam the printer. t Use labels only under normal temperature and humidity conditions. Envelopes (manual insertion): Black ribbon cartridge (#8750) Life expectancy at 14 dots/character: 3 million characters MTBF: Color ribbon cartridge (S015073 - Epson C11C294131BZ | Product Information Guide - Page 3
Paper Park Pause 3sec PAUSE light On when printing is paused. When the printer is out of paper, the light flashes and the beeper sounds three flashes when you can tear off the last sheet at the edge of the printer cover. Additionally, the PAUSE light comes on and the beeper sounds five times - Epson C11C294131BZ | Product Information Guide - Page 4
the active font. Press the button repeatedly to cycle through all selections. Your selection stays in effect until you change it or turn off the printer. Any font you select with your software overrides any you selected at the control panel. Roman Sans Serif Draft Draft Condensed Font 12 Pap Micro - Epson C11C294131BZ | Product Information Guide - Page 5
next step. 4. Press the FONT button now to print help text that guides you through the operations. (Once you are experienced with the Printer Setting mode, you can skip this step by pressing LF/FF instead.) The printed instructions include submenu tables that list all of the settings you can change - Epson C11C294131BZ | Product Information Guide - Page 6
current settings. After you check them, turn the printer off to exit without making changes. ,QVWDOOLQJýWKHý5LEERQý&DUWULGJHý Before installing the ribbon cartridge, make sure the printer is not plugged into an electrical outlet. 1. Open the printer cover to the upright position, then pull it up - Epson C11C294131BZ | Product Information Guide - Page 7
ribbon guide. Turn the ribbon tightening knob to help feed the ribbon into place; it should not be twisted or creased. 3. Turn the ribbon-tightening knob in the direction of the arrow to remove any slack from the ribbon so it is easier to install. 4. Insert the ribbon cartridge into the printer as - Epson C11C294131BZ | Product Information Guide - Page 8
800 LX-80/86 FX-850 FX-86e/800 Not color If none of these printers is listed among your program's options, select the first one available from the following: any FX printer, EPSON printer, and Draft printer. $GMXVWLQJýWKHý/RDGLQJý3RVLWLRQ The loading position is the position of the paper when the - Epson C11C294131BZ | Product Information Guide - Page 9
section for instructions. t Are you printing on labels, multi-part forms, or other documents that require a precise print position? Use the tractor as a pull tractor as described on the next page. Printing with the push tractor 1. Make sure the printer is turned off. Remove the paper guide and pull - Epson C11C294131BZ | Product Information Guide - Page 10
tractor F Caution: When using the pull tractor, set the Auto tear off feature in the Printer Setting mode to off; otherwise the paper may jam. 1. Turn the printer off; then remove the paper guide. Pull the paper-release lever forward to the continuous paper position. 3. Lift the tractor forward - Epson C11C294131BZ | Product Information Guide - Page 11
printer as a guide. Position the paper using the scale on the printer as a guide. The printer it. Move the paper support midway between the two cartridge and a motor unit. Here's how to install the kit: 1. Turn off the printer and remove the printer cover. Slide the connector cover on the printer - Epson C11C294131BZ | Product Information Guide - Page 12
of the cartridge firmly to fit the plastic hooks into the printer slots. ,QIRUPDWLRQý5HIHUHQFHý/LVW Engineering Change Notices None Product Support Bulletins None Technical Information Bulletins None Related Documentation TM-LX300 EPSON LX-300 Service Manual PL-LX300 EPSON LX-300 Parts
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
3ULQWHU 6SHFLILFDWLRQV
Printing
Printing method:
9-pin dot matrix
Print speed:
3ULQWLQJ PRGH
&KDUDFWHU VL]HV
0D[LPXP SULQWLQJ VSHHG
’UDIW
°± FSL
ºº± FSV
’UDIW
°º FSL
º²Ø FSV
’UDIW FRQGHQVHG
°³´° FSL
°µµ FSV
’UDIW FRQGHQVHG
º± FSL
ºº± FSV
’UDIW HPSKDVL]HG
°± FSL
°°± FSV
’UDIW GRXEOH ZLGWK
l FSL
°°± FSV
1/4
°± FSL
ØØ FSV
1/4
°º FSL
lΠFSV
1/4 GRXEOH ZLGWK
l FSL
ºº FSV
FSLª FKDUDFWHUV SHU LQFK
FSVª FKDUDFWHUV SHU VHFRQG
Resolution:
3ULQWLQJ PRGH
+RUL]RQWDO
GHQVLW\
9HUWLFDO
GHQVLW\
$GMDFHQW
GRWV SULQW
’UDIW
°º± GSL
³º GSL
1R
’UDIW FRQGHQVHG
ºØ± GSL
³º GSL
1R
’UDIW HPSKDVL]HG
°º± GSL
³º GSL
<HV
1/4
ºØ± GSL
°ØØ GSL
1R
%LW LPDJH
²± GSL
³º GSL
<HV
%LW LPDJH
³º GSL
³º GSL
<HV
%LW LPDJH
µ± GSL
³º GSL
<HV
%LW LPDJH
¶± GSL
³º GSL
<HV
%LW LPDJH
°º± GSL
³º GSL
<HV
%LW LPDJH
°º± GSL
³º GSL
1R
%LW LPDJH
ºØ± GSL
³º GSL
1R
Printing
direction:
Bidirectional with logic-seeking for draft
with monochrome ribbon. Unidirectional
for NLQ text, bit image, and color printing.
Line spacing:
1/6 inch, 1/8 inch, or programmable in
1/216-inch increments
Paper feed speed:
79 milliseconds per 1/6-inch line
2.78 inches/sec. for continuous paper
Buffer:
Approximately 4 KB
Internal fonts and character tables
Bitmap fonts:
EPSON NLQ Roman
EPSON NLQ Sans Serif
EPSON Draft
Draft condensed
Character tables:
1 italic and 8 graphics character tables
Character sets:
13 international character sets
Paper
Single sheets (CSF):
Width
210 mm (8.5 inches)
Length
297 mm (11.0 inches)
Thickness
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
Weight
64 to 90 g/m
2
(18 to 24 lb)
Quality
Bond paper, plain paper, recycled paper
Single sheets (manual insertion):
Width
182 to 257 mm (7.2 to 10.1 inches)
Length
182 to 364 mm (7.2 to 14.3 inches)
Thickness
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
Weight
52 to 90 g/m
2
(14 to 24 lb)
Quality
Bond paper, plain paper, recycled paper
Note:
Use 90 g/m
2
paper under normal temperature and humidity
conditions only.
Continuous paper:
Width
102 to 254 mm (4 to 10 inches)
Copies
Three sheets (one original plus two copies)
Thickness
0.065 to 0.25 mm (0.0025 to 0.0098 inches)
total
Weight
52.3 to 82 g/m
2
(14 to 22 lb) for one sheet
40 to 58.2 g/m
2
(12 to 15 lb) per sheet in
multi-part forms
Use only two- or three-part carbonless multi-part
forms fed with the tractor.
When using side-crimped multi-part forms, raise the
paper guide to keep the printing position accurate.
When using the push tractor, the printing position for
the last page may not be accurate because the page
comes off the tractor.
Pause
LF/FF
Font
Paper Park
Micro Adjust
1
2
Roman
Sans Serif
Draft
Draft Condensed
3sec
(3621 /;·Œ±±
,QN -HW 3ULQWHUV
ظºº¸¶Ø
(3621 /;·Œ±±·°