Epson C238001 User Setup Information - Page 16
Error Indicators
View all Epson C238001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Error Indicators Check the printer's control panel lights and follow the appropriate instructions below. For more information, see, Chapter 7 of your User's Guide. Light Status n = On f = Flashing Beep pattern lll short series of beeps (three times) l l l l l long series of beeps (five times) Pause n Paper Out n Beep pattern lll The Pause and Paper Out lights are on, and you hear the short series of beeps. Cause Solution No paper is loaded in the selected paper source. Load paper in the selected paper source, or select a different paper source with the paper release lever. When the Paper Out light goes off, press the Pause button to turn off the Pause light. The paper is not loaded correctly. Remove the paper and reload it correctly. Pause n Beep pattern lllll Cause The paper release lever is set to the wrong position. The Pause light is on and you hear the long series of beeps. Solution Load paper in the selected paper source, then set the paper release lever to the position for that paper path. If paper from another paper source is loaded in the printer, press the Load/Eject button to eject the paper; then move the paper release lever to the desired position. Pause n Paper Out f Beep pattern lll The Pause light is on, the Paper Out light is flashing, and you hear the short series of beeps. Cause Solution A single sheet of paper is not fully ejected. Press the Load/Eject button to eject the sheet. Continuous paper does not feed to the standby position. Tear off the printed page at the perforation; then press the Load/Eject button. The paper feeds to the standby position. Paper is jammed in the printer. To clear a paper jam, see "Clearing Paper Jams" earlier in this guide. Pause n Paper Out f Cause The print head is overheated. The Pause light is on and the Paper Out light is flashing. Solution Wait a few minutes until the printer cools down; the printer resumes printing automatically once the print head cools. Font f Cause Tear Off/Bin f Pause f Paper Out f All the lights are flashing. Solution An unknown printer error has occurred. Turn off the printer and leave it off for several minutes; then turn it on again. If the error recurs, contact your dealer.