Epson Expression 10000XL - Photo Edition Product Information Guide - Page 4

Epson Expression 10000XL Transporting the Scanner and TPU Lock the scanner's transportation lock before transporting it or storing it for an extended time. 1. Turn on the scanner and wait about 30 seconds for it to initialize. When the Ready light stops blinking and remains on, turn the scanner off. 2. Unplug the AC power cord, and then push down the transportation lock on the back of the scanner to the Lock position. 3. Place the scanner in its original box, or use equivalent packing materials. Transporting the TPU Before shipping or storing the transparency unit (TPU), follow these steps: 1. Use a coin to turn the transportation lock to the Lock position. Cleaning the Scanner Follow these steps to clean the scanner. 1. Press the . power button to turn the scanner off, and unplug the power cord. Caution: Always unplug the scanner before cleaning. 2. Use a soft, damp cloth and mild detergent to clean the outer case. Caution: Be careful not to spill liquid or let water get into the scanner mechanism or electronic components. This could permanently damage them. Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case. 3. Clean dust and smudges from the document table glass with a soft, dry cloth (a microfiber glass cleaning cloth is recommended). You can also use compressed air spray cleaner. To remove grease, use pretreated lens or scanner wipes, or a small amount of glass cleaner on a soft cloth. Dry the document table glass afterwards. Caution: Never spray glass cleaner directly on the document table. Always spray it on a cloth first and then wipe the glass. Never use a harsh or abrasive brush or cleaning product to clean the document table. A damaged glass surface can decrease the scanning quality. Avoid leaving photos on the scanner glass for an extended period of time, or residue from the photos may adhere to the glass. 2. Disconnect the TPU cable from the OPTION port on the back of the scanner. 3. Remove the TPU from the scanner and place it in its original box, or use equivalent packing materials. 4 - Epson Expression 10000XL 5/04