Epson FX-2180 User Manual - Page 181

Using the C82305@ ýor C82306@ serial interface card To use the C82305@ or C82306@ serial interface card, see the sections below regarding the baud rate, handshake timing, and error handling. For all other data transfer conventions, such as word structure and communications protocol, see your interface card manual. Selecting a baud rate You can select from the following baud rates: 300, 600, 1200, 2400, 4800, 9600, and 19200 bps (bits per second). To set the baud rate, see the bit-rate selection table in your interface card manual. Handshake timing When the unused area for data in the input buffer drops to 256 bytes, the printer outputs an X-OFF code or sets the DTR flag to 1 (MARK) to indicate that it cannot receive data. When the unused area increases to 512 bytes, the printer outputs an X-ON code or sets the DTR flag to 0 (SPACE) to indicate that it is ready to receive data. Error handling When the printer detects a parity error, the print data is replaced with an asterisk (@ ). The printer ignores all other errors, including framing and overrun errors. A-18 Enhancing Your Printer With Options