Epson LQ-300 User Manual - Page 26
Running the Self Test, on the platen.
View all Epson LQ-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Running the Self Test The built-in self test function demonstrates that the printer is working properly. You can run the test with either continuous paper or single sheets; this section describes the easier way, with single sheets. Caution: You should use paper at least 210 mm (8.3 inches) wide to run the self test; otherwise, the print head prints directly on the platen. 1. Make sure the printer is turned off and the paper-release lever is pushed back to the single-sheet position. Raise the paper guide upright. 1-10 Setting Up the Printer
Running the Self Test
The built-in self test function demonstrates that the printer is
working properly. You can run the test with either continuous
paper or single sheets; this section describes the easier way,
with single sheets.
Caution:
You should use paper at least
210 mm (8.3 inches) wide to
run the self test; otherwise, the
print
head prints directly
on the platen.
1.
Make sure the printer is turned off and the paper-release
lever is pushed back to the single-sheet position. Raise the
paper guide upright.
1-10
Setting Up the Printer