Epson LQ-950 User Manual - Page 41
Checking the Operation, Ribbon
View all Epson LQ-950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Checking the Operation If the self test does not print properly, check the control panel and the print head area. If paper is jammed, turn off the printer. Then remove the paper using the platen knob and load a new sheet. See that all packing material and shipping restraints have been removed from inside the printer. (You can also see Chapter 7 for further information.) Problem Solution The printer does not print. The printer sounds like if is printing, but nothing is printed. The ribbon may not be installed properly. Turn off the printer, reinstall the ribbon cartridge, and then tighten the ribbon by turning the ribbon-tightening knob. Make sure the ribbon passes between the print head and ribbon guide. The test did not print. The ribbon may be worn. Replace the ribbon cartridge. See Replacing the Ribbon in Chapter 6. Turn off the printer and repeat the self test. Make sure you hold down the FORM FEED or LINE FEED button the entire time you are turning on the printer. Turn off the printer and disconnect the cable from the host computer. Try the self test again. If the printer still does not print the self test correctly, contact your Epson dealer or Epson authorized service center. Setting Up the Printer 1-27