Epson NX400 Quick Guide - Page 16
Selecting Individual Photos for Printing
UPC - 010343872103
View all Epson NX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
When you want to remove the card, make sure the memory card access light is not flashing, then pull the card straight out of its slot. Caution: Do not remove the card or turn off the NX400 Series while the memory card access light is flashing; you may lose data on the card. Selecting Individual Photos for Printing You can select individual photos for printing as you view them on the LCD display screen. 1. Press the Memory Card button. You see this screen: 2. Press OK to select View and Print Photos. 3. Press l or r to move through your photos and display one that you want to print. 4. Press the + or - button to select the number of copies you want of that photo. 5. If you want to crop your photo and enlarge the resulting image area to fit onto your paper, press Display/Crop. ■ To resize the image area, press + or -. ■ To move the image area, use the arrow buttons. ■ To check the zoomed image, press OK. ■ To rotate the image area, press Menu. After you finish cropping your photo, press OK. 6. Repeat steps 3 through 5 to select more photos, if you want. 7. To change any of the print settings displayed on the screen, press Menu and select your settings (see page 20). When you're done, press OK. 8. Press x Start to print. To cancel printing, press y Stop/Clear Settings. Note: You can change the way your photos appear on the LCD display screen. Press Setup, select Maintenance, select Display Format, then select 1-up With Info, 1-up without Info, or View Thumbnail Images. 16 Printing From a Memory Card