Epson NX400 Quick Guide - Page 20

3. Load the type of paper on which you want to print your photos, either plain or photo paper. 4. Make sure your memory card is still inserted and the LCD display screen shows Print Photos from Index Sheet highlighted. 5. Press OK, then press x Start to start scanning and printing. Wait until printing finishes before printing from any additional index sheets. If you need to cancel printing, press y Stop/Clear Settings. Memory Card Print Settings Press the Menu button to change settings. When you're done, press OK. ■ To change the paper type, select Paper Type and choose the type of paper you loaded (see page 13). ■ To change the paper size, select Paper Size and choose the size of paper you loaded. Note: Paper Size options depend on the Paper Type you choose. ■ To change the layout, select Layout and choose With Border to leave a small margin around the image or select Borderless to expand the image all the way to the edge of the paper (slight cropping may occur). ■ To change the print quality, select Quality and choose Standard, Best, or Draft. Note: For photos, the default setting for Quality is Standard. You can change this setting only when you print on plain paper. ■ To print the date on your photos and select the format for it, select Date and choose the format you want. ■ To improve print quality, select Bidirectional and choose Off (choose On for faster print speed). ■ To adjust the amount of image expansion when printing borderless photos, select Expansion and choose Standard, Min., or Mid. Note: You may see white borders on your printed photo if you use the Min setting. 20 Printing From a Memory Card