Epson P7000 User's Guide - Page 12
Removing the Battery, Make sure the viewer is turned off see
UPC - 010343866829
View all Epson P7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To charge the battery, connect the AC adapter as shown below. Connect the other end to the power cord and plug it into an electrical outlet. Caution: Do not connect the AC adapter when the battery is not installed; this can damage the viewer. Turn off the viewer before disconnecting the AC adapter. The battery status is displayed in the top right corner of the LCD screen when the viewer is on. Battery is fully charged. Battery power is about half full. Battery power is low. Battery is charging. Removing the Battery If you plan to store the viewer for an extended period of time, you should remove the battery. 1 Make sure the viewer is turned off (see page 16). Caution: Remove the AC adapter if it is connected to the viewer. Never remove the battery while the viewer is turned on. Doing so may cause files to be lost or damaged. 2 Open the battery cover. 3 Slide the battery release lever to the left. The battery pops out. Note: The battery may become hot when the viewer is operated during charging. Charging will stop until the battery cools down. Getting Started 12