Epson P7000 User's Guide - Page 85
Do not use power outlets on the same circuit as large
UPC - 010343866829
View all Epson P7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
❍ The AC adapter and power cable provided are designed for use with the viewer. Do not attempt to use them with other electronic devices unless specified. ❍ Do not remove the AC adapter from this device during operations (connecting the AC adapter during operations is possible). ❍ The AC adapter included is designed for use with the viewer. Use of any other adapter could result in fire, electrical shock, or injury. ❍ Use only AC adapter model A351H with the viewer. ❍ Do not connect the AC adapter when the battery is not installed. Otherwise, the viewer may be damaged. ❍ Use only the power source that meets the power requirements indicated on the label attached to the product. If you are not sure of the power supply specifications in your area, contact your local power company or regulatory agency. ❍ Make sure the total amperage of all devices plugged into the power outlet does not exceed the power outlet's ampere rating. ❍ If you use an extension cord with the viewer, make sure the total amperage of all devices plugged into the extension cord does not exceed the cord's amperage rating. ❍ Do not use a damaged or frayed AC adapter. ❍ Never disassemble, modify, or attempt to repair the AC adapter by yourself. ❍ Do not use power outlets controlled by wall switches or automatic timers. ❍ Do not use power outlets on the same circuit as large motors or other appliances that may cause voltage fluctuations. ❍ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. ❍ To prevent fire or electric shock, do not cover the AC adapter with a blanket or similar covering. ❍ Position the viewer's power cord so that it will not be stepped on or run over. ❍ Do not place any objects on the power cord or the AC adapter. ❍ Keep the power cord straight at the ends and at the points where it enters the transformer. ❍ The power cord should be placed to avoid abrasions, cuts, fraying, crimping, kinking, and other damage. ❍ If you cannot insert the plug into the power outlet, contact an electrician. Notices and Specifications 85