Epson PictureMate Show - PM 300 Basics - Page 48
Checking and Cleaning the Print Head, start Auto Cleaning.
View all Epson PictureMate Show - PM 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Checking and Cleaning the Print Head If your print quality is not as good as it used to be-if photos are too light, are missing colors, or have lines running through them-PictureMate's print head nozzles may need cleaning. You can check the nozzles and clean the print head if necessary. 1 Load paper in PictureMate. 2 Press the Menu button on the remote control. 3 Select Maintenance and press OK. 4 Select Nozzle Check and press OK. 5 Press Print. The nozzle check pattern is printed. 6 Check the pattern to see if there are any gaps or missing lines. OK Needs cleaning ● If the pattern is OK, press OK to finish. ● If the pattern has gaps or missing lines, select No and press OK. Continue pressing OK to start Auto Cleaning. Cleaning takes about 60 seconds. PictureMate makes some noise and you see an Auto Cleaning message. If you don't see any improvement after cleaning three times, see "Print Quality Problems" on page 52. 46