Epson PictureMate Show - PM 300 Basics - Page 50
Cleaning PictureMate, Replacing the Remote Control Battery, or device. - driver
View all Epson PictureMate Show - PM 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
6 Look at the printed squares to determine which one is the most even, with no streaks or white lines. (You may need to use a magnifying glass.) 7 Press l or r to select the number for the best square (1 to 9) in set #1. 8 Press d to move to #2. 9 Press l or r to highlight the number for the best square (1 to 9) in set #2. Then press OK. PictureMate aligns the print head and exits the Maintenance menu. Note: The square you select becomes the middle square (#5) the next time you align the print head. Cleaning PictureMate To keep PictureMate working at its best, you should clean it several times a year. 1 Turn off PictureMate, unplug the power cable, and disconnect the power adapter and any USB cable or device. 2 Remove all paper, then use a soft brush to clean any dust or dirt from the paper feeder and output tray. 48 3 Clean the PictureMate exterior with a soft, damp cloth. 4 Use a soft, dry cloth to clean the PictureMate screen. Do not use liquid or chemical cleaners. Caution: Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can damage the components and case. Don't get water on the components and don't spray lubricants or oils inside PictureMate. Replacing the Remote Control Battery If the remote control stops working, you need to change the battery. Use a CR2025 lithium button battery only. 1 Turn the remote control upside down. 2 Push in the latch and slide out the battery holder. You may need to use a small screw driver or other tool.