Epson PowerLite 435W User's Guide - Page 136
Power light, Lamp light, Temperature, Status and solution, light, High Altitude Mode, Parent topic
View all Epson PowerLite 435W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Power light Red Lamp light Off Temperature light Red Red Flashing red Off On Flashing Off orange Red Off Flashing red Red or flashing Flashing red Flashing red red Status and solution Projector has overheated and turned off. Leave it turned off to cool down for five minutes. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If overheating continues, replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Replace the lamp soon to avoid damage. Do not continue using the projector. A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help. Internal projector error. Turn the projector off, unplug it, and contact Epson for help. Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems 136