Epson PowerLite 435W User's Guide - Page 47
Wireless Network Projection, Wired LAN, Enter, IP Settings, IP Address, Subnet, Gateway Address
View all Epson PowerLite 435W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
7. Select the Wired LAN menu and press Enter. 8. If necessary, select IP Settings and press Enter. 9. Select your IP Settings as necessary: • If your network assigns addresses automatically, turn on the DHCP setting. • If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed. Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter. 10. To prevent display of the IP address on the standby screen, turn off IP Address Display. 11. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wired Network Projection Wireless Network Projection You can send images to your projector through a wireless network. To do this, you must install the optional Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection. 47