Epson Stylus COLOR 777i Printer Basics - Page 19
Printing on Envelopes, Using Advanced Settings
View all Epson Stylus COLOR 777i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Using Advanced Settings For maximum control over your project, you can customize your print settings-such as Print Quality and Gamma-and use special effects. To access these settings in your printer software, click Custom and then click the Advanced button. You see the Advanced dialog box. For details on all the settings, click Help on screen or see your electronic Reference Guide (as described on page 2). After you customize your print settings on the Advanced dialog box, you can save them as a group so you can reuse them whenever you print a similar project. See your electronic Reference Guide for details. The default Gamma setting of 1.8 provides the optimum contrast quality for your photos. However, you can change it to either 1.5 (for decreased contrast) or 2.2 (for increased contrast; recommended for matching colors with sRGB devices). Printing on Envelopes You can load up to 10 envelopes at a time, flap edge first and printable side up. Place them against the right edge of the sheet feeder and slide the left edge guide against them. load with the printable side up (For best results, press each envelope flat before loading it, or load one envelope at a time.) Select Plain paper as the Media Type setting and choose the correct envelope size as the Paper Size setting. If your printout has smears or banding (light lines), try turning off High Speed in the Advanced dialog box. (See the instructions above to access the dialog box.) 15