Epson Stylus COLOR 777i Printer Basics - Page 29

Cleaning the Printer

Page 29 highlights

5. Follow the instructions on the screen to print a test page. You see this window: 6. On the printed page, select the pattern that shows the two vertical lines most precisely printed on top of each other. Select one pattern each for rows 1, 2, and 3. Then enter the number of the best pattern for each row in the corresponding boxes on the screen. 7. Click Realignment to print another test page. Make sure the pattern numbered 8 in each row is the best aligned. If not, repeat steps 6 and 7. 8. When you're finished, click Finish. Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. Follow these steps: 1. Turn off the printer, unplug the power cord, and disconnect the printer cable. 2. Remove all the paper from the sheet feeder. 3. Clean the exterior of the printer with a soft, damp cloth. 4. Clean ink out of the printer's interior with a soft, damp cloth. Don't touch the gears inside the printer. Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can damage the printer components and case. Don't get water on the printer components and don't spray lubricants or oils inside the printer. Don't use any cleaning sheets included with special media; they may jam inside the printer. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

25
5.
Follow the instructions on the screen to
print a test page. You see this window:
6.
On the printed page, select the pattern
that shows the two vertical lines most
precisely printed on top of each other.
Select one pattern each for rows 1, 2,
and 3. Then enter the number of the
best pattern for each row in the
corresponding boxes on the screen.
7.
Click
Realignment
to print another test
page. Make sure the pattern numbered 8
in each row is the best aligned. If not,
repeat steps 6 and 7.
8.
When you’re finished, click
Finish
.
Cleaning the Printer
To keep your printer working at its best, you should clean it several times a year.
Follow these steps:
1.
Turn off the printer, unplug the power cord, and disconnect the printer cable.
2.
Remove all the paper from the sheet feeder.
3.
Clean the exterior of the printer with a soft, damp cloth.
4.
Clean ink out of the printer’s interior with a soft, damp cloth.
Don’t touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner for cleaning;
they can damage the printer components and case.
Don’t get water on the printer components and don’t spray lubricants
or oils inside the printer.
Don’t use any cleaning sheets included with special media; they may
jam inside the printer.