Epson Stylus COLOR 777i Printer Basics - Page 9
Printing from Start to Finish, Printing with Windows, Loading Paper - ink
View all Epson Stylus COLOR 777i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Printing from Start to Finish Here's what to do to print a basic document-such as a newsletter or photograph- from loading the paper to selecting print settings to controlling the print job. Follow the instructions in these sections: s "Printing with Windows" below s "Printing on a Macintosh" on page 9 If you're already familiar with EPSON ink jet printing, you can skip ahead to these sections: s "Using PhotoEnhance, Custom, and Advanced Settings" on page 13 s "Printing on Envelopes" on page 15 s "Using Special Papers" on page 16 s "Selecting the Correct Media Type" on page 17 Printing with Windows This section describes the basic steps for printing with Windows. (To print on a Macintosh, see page 9.) Loading Paper Make sure your printer and computer are turned on. Load paper only up to this arrow Slide paper against the right edge Place your paper against the right edge of the sheet feeder and slide the left edge guide against the paper. (Don't push the paper deeper into the feeder.) Follow these guidelines when loading paper: s Load the printable side face up. It's usually whiter or brighter than the other side. s Load letterhead or preprinted paper into the printer top edge first. s Don't load paper above the arrow on the left edge guide. 5