Epson TM T88II Technical Reference

Epson TM T88II - B/W Direct Thermal Printer Manual

Get Epson TM T88II - B/W Direct Thermal Printer PDF manuals and user guides View all Epson TM T88II manuals
Add to My Manuals
Save this manual to your list of manuals

Epson TM T88II manual content summary:

  • Epson TM T88II | Technical Reference - Page 1
    TM-T88II/T88III Technical reference guide EPSON English 405227700
  • Epson TM T88II | Technical Reference - Page 2
  • Epson TM T88II | Technical Reference - Page 3
    TM-T88II/T88III Technical Reference Guide Cautions ❏ No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recabling, or otherwise, without the prior written permission of Seiko Epson Corporation. ❏
  • Epson TM T88II | Technical Reference - Page 4
    For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. WARNING: You must follow warnings carefully to
  • Epson TM T88II | Technical Reference - Page 5
    Warnings TM-T88II/T88III Technical Reference Guide WARNING: ❏ Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire or electric shock. Immediately unplug the equipment. ❏ Only disassemble this product as described in this manual
  • Epson TM T88II | Technical Reference - Page 6
    injury, take care not to insert fingers or any part of the hand in the roll paper opening where the manual cutter is installed. ❏ Do not open the roll ink cartridge holder may cause an injury. Modular Connectors The printer uses the modular connectors specifically designed for the cash drawer or
  • Epson TM T88II | Technical Reference - Page 7
    -T88II/T88III Technical Reference Guide About this Manual This manual describes the TM-T88III, a current EPSON thermal printer product. This manual also describes the TM-T88II, an obsolete product, for the purpose of supporting legacy systems. The TM-T88II has been replaced by the newer TM-T88III
  • Epson TM T88II | Technical Reference - Page 8
    Name of document EPSON OPOS ADK Manual EPSON Advanced Printer Driver EPSON Advanced Printer Driver Manual Description Provides information for anyone who is programming using OPOS. This is included in the EPSON OPOS ADK.* This is a Windows driver.* Provides information for anyone who is programming
  • Epson TM T88II | Technical Reference - Page 9
    Contents TM-T88II/T88III Technical Reference Guide Revision History i For Safety ii Key to Symbols ii Warnings iii Cautions iii Modular Connectors iv About this Manual v Aim of the Manual v Manual Content v Related Software and Documents v Chapter 1 Product Overview Product Structure
  • Epson TM T88II | Technical Reference - Page 10
    Printer Is Offline 4-2 Outputting Hex Dumps 4-2 Chapter 5 Product Specifications Product Specifications (TM-T88II/TM-T88III 5-1 Print Specifications (TM-T88II/TM-T88III 5-2 Character Specifications (TM-T88II/TM-T88III 5-3 Paper Specifications (TM-T88II/TM-T88III 5-3 Printable Area (TM-T88II/TM
  • Epson TM T88II | Technical Reference - Page 11
    TM-T88II/T88III Technical Reference Guide Appendix C Character Code Tables Page 0 (PC437: USA, Standard Europe C-1 Page 1 (Katakana C-2 Page 2 (PC850: Multilingual C-3 Page 3 (PC860: Portuguese C-4 Page 4 (PC863: Canadian-French C-5 Page 5 (PC865: Nordic C-6 Page 16 (WPC1252) (TM-T88III only
  • Epson TM T88II | Technical Reference - Page 12
    x Contents Rev. A
  • Epson TM T88II | Technical Reference - Page 13
    Overview TM-T88II/T88III Technical Reference Guide The TM-T88III thermal printer product is currently available from EPSON. The TM-T88II is an obsolete product, which is described here for the purpose of supporting legacy systems. In addition, the PS-170, the power supply for the TM-T88II printer
  • Epson TM T88II | Technical Reference - Page 14
    , 38400 added). TM-T88II (legacy model) Approx. 120 mm/s (4.72") maximum Average approx. 1.7 A 2400, 4800, 9600, 19200 4. Conditions for canceling receive buffer BUSY state * 5. Supported character sets (extended graphics) 6. Driver (EPSON OPOS ADK, Advanced Printer Driver) 38400 is selected
  • Epson TM T88II | Technical Reference - Page 15
    Names and Basic Operation 1.2.1 Part Names TM-T88II/T88III Technical Reference Guide Cutter cover Power switch FOEEUPDATPEERRRPOORWER Printer cover Control panel Cover open button Figure 1-1 Printer part names * For details on DIP switch settings, refer to "DIP Switch Positions and Steps for
  • Epson TM T88II | Technical Reference - Page 16
    is located at the bottom right front of the printer. (Refer to "Printer part names" (page 1-3).) Turn the printer on or off. The marks on the switch (0 = on / 1 = off) indicate the printer switch position. CAUTION: Before turning on the printer be sure to check that the AC adapter is connected
  • Epson TM T88II | Technical Reference - Page 17
    TM-T88II/T88III Technical Reference Guide 1.2.4 Connectors All cables are connected to the connector panel on the lower rear of the printer. FG FG DK DC24V Interface connector Drawer kick-out connector Power supply connector Figure 1-3 Connector panel ❏ Drawer kick-out connector for
  • Epson TM T88II | Technical Reference - Page 18
    the roll paper core. 1.3.2.1 Installing Roll Paper 1. Make sure the host has not sent a printing command to the printer, and press the cover open button to open the printer cover. If the printer cover does not open, a probable cause is that the autocutter is locked. If this happens, refer to "Paper
  • Epson TM T88II | Technical Reference - Page 19
    the roll paper toward you. 4. Close the printer cover. TM-T88II/T88III Technical Reference Guide FOEEUPDTAPEERRRPOORWER Figure 1-8 Closing the printer cover 5. Tear off the leading edge of the roll paper using the manual cutter. FOEEUPDTAPEERRRPOORWER Figure 1-9 Tear off paper 1.3.2.2 Replacing
  • Epson TM T88II | Technical Reference - Page 20
    1.3.4 Shipping Procedures Do the following before shipping the printer. 1. Press the power switch to turn the power off. 2. Make sure the POWER LED is out. 3. Remove the power supply connector. 4. Pack the printer, keeping the top and bottom correctly oriented. 1-8 Product Overview Rev. A
  • Epson TM T88II | Technical Reference - Page 21
    Chapter 2 Setup TM-T88II/T88III Technical Reference Guide Before using the printer, you need to make various settings to increase the printer's functionality. Configure the printer appropriately depending on the environment. 1. Install the printer (page 2-2) Detailed setup 2. Set the DIP
  • Epson TM T88II | Technical Reference - Page 22
    supply or other cables or other objects. 2.1.2 Precautions for Wall Installation ❏ Make the following settings on the printer when you hang it on a wall. For details, refer to the installation manual provided with the optional WH-10 Wall Hanging Bracket Set. • Install the roll paper stopper • Adjust
  • Epson TM T88II | Technical Reference - Page 23
    TM-T88II/T88III Technical Reference Guide 2. Unscrew the screw to remove the DIP switch cover from the base of the printer. DSW1 DSW2 Figure 2-2 Removing the DIP switch cover 3. Set the DIP switches as desired, using the tip of a tool, such as a small screwdriver. 4. Attach the
  • Epson TM T88II | Technical Reference - Page 24
    SW Function ON OFF 2-1 Handshake (BUSY) conditions Receive buffer full Printer offline or receive buffer full * 2-2 Reserved (do not change 2-5 Conditions for canceling receive buffer BUSY state (DIP SW2-5) TM-T88II TM-T88III Conditions to cancel receive buffer BUSY state Switch No. 2-5
  • Epson TM T88II | Technical Reference - Page 25
    TM-T88II/T88III Technical Reference Guide Note: With the TM-T88III, the DIP SW2-5 setting is enabled only when DIP SW1-2 is set to OFF and the receive buffer is set to 4KB. With the older TM-T88II model, be sure to set DIP SW2-5 to OFF before use. Otherwise, the printer may no longer function
  • Epson TM T88II | Technical Reference - Page 26
    -2 is set to OFF and the receive buffer is set to 4KB. With the TM-T88II, be sure to set DIP SW2-5 to OFF before use. Otherwise, the printer may no longer function correctly. When the TM-T88II is used or when TM-T88III is used with DIP SW1-2 set to ON, the BUSY state is canceled
  • Epson TM T88II | Technical Reference - Page 27
    TM-T88II/T88III Technical Reference Guide 2.3 Adjusting the Roll Paper Near-End Detector Below are two situations where a roll paper NE detector adjustment is required. ❏ To adjust the detection position to
  • Epson TM T88II | Technical Reference - Page 28
    for available serial cross cables are as follows: Figure 2-4 Cross cable diagrams The cable needed depends on printer control and handshake method. You can operate the TM printer with a Windows driver, OPOS, or ESC/POS commands. XON/XOFF, DTR/DSR, or RTS/CTS are available as handshake controls
  • Epson TM T88II | Technical Reference - Page 29
    TM-T88II/T88III Technical Reference Guide Stand alone Both the TM printer and DM-D are connected to the host computer directly via the serial port. Application control TM side control setting XON/XOFF (except OPOS) XON/XOFF 1 Type A or B 2 DM-D500: A, B Other DM-D: not possible DTR/DSR 1 -
  • Epson TM T88II | Technical Reference - Page 30
    inches and millimeters 3. When using interface cables equipped with a ground line, attach the ground line to the screw hole marked "FG" on the printer. 4. Connect the other end of the interface cable to the host computer. 2-10 Setup FG FG DK DC24V Interface connector Drawer kick-out connector
  • Epson TM T88II | Technical Reference - Page 31
    TM-T88II/T88III Technical Reference Guide 2.4.2 Parallel Interface Connection The parallel interface model TM printer is connected to the host computer via the parallel port. When a customer display (DM-D) is to be connected, connect the TM printer to the host computer via the serial port. 2.4.2.1
  • Epson TM T88II | Technical Reference - Page 32
    T88III/T88III by using 2 USB downstream connectors. Note: The hub installed in a USB model connector panel is a bus-power-supply hub. It is important to note that bus-power-supply hubs (including other USB model TM printers) and bus-power-supply functions with a current consumption of 100 mA or more
  • Epson TM T88II | Technical Reference - Page 33
    TM-T88II/T88III Technical Reference Guide To use USB model TM printers, the TM printer driver (EPSON OPOS ADK or advanced printer driver) must be installed on the host computer. Get the latest driver information from one of the following URLs: For customers from North America, go to the following
  • Epson TM T88II | Technical Reference - Page 34
    ) LED (yellow) Switch Drawer kick-out connector Printer power supply connector Figure 2-14 Example Ethernet port interface "UB-E02 Technical Reference Guide" from one of the following URLs: For customers from North America, go to the following web site: http://pos.epson.com/ For customers from
  • Epson TM T88II | Technical Reference - Page 35
    Reference Guide 2.5 Connecting Power Supply Unit and Cash Drawer Always use one of the following power supplies: the EPSON PS-180 (the currently available power supply that can be used with either the TM-T88III or the TM-T88II); the PS-170 (the legacy power supply used with the TM-T88II printer when
  • Epson TM T88II | Technical Reference - Page 36
    the Advanced Printer Driver (APD) (Windows driver) or the EPSON OPOS ADK (OCX driver) must be installed. For an outline of each driver, refer to "Introducing the Control Methods" (page 3-1). For details on installation methods, refer to the manual for the respective driver. Note: The TM-T88III also
  • Epson TM T88II | Technical Reference - Page 37
    a Windows driver. 3.1.1.1 EPSON Advanced Printer Driver overview EPSON Advanced Printer Driver has the following features: ❏ Supplies a Windows printer driver for the TM printer to enable printing from a general Windows application. ❏ Can execute POS printer-specific functions, such as cutting paper
  • Epson TM T88II | Technical Reference - Page 38
    • Windows XP Professional Refer to the release note for the driver for the latest information. ❏ Supported development languages • Visual Basic • Visual C++ ❏ Supported devices Refer to the release note for the driver for details on available equipment. • EPSON receipt printer 3-2 Application
  • Epson TM T88II | Technical Reference - Page 39
    TM-T88II/T88III Technical Reference Guide • EPSON customer display • EPSON cash drawer Note: A separate USB device driver is required for a USB model printer, and a separate IP setup utility is required for an Ethernet model printer. See the manual packed with the APD. When you use the APD for the
  • Epson TM T88II | Technical Reference - Page 40
    manual, manual for each device) ❏ Various utilities • SetUpPOS utility Facilitates selection of equipment and connection ports and various settings (print wait time, etc.). • TM Flash logo utility Saves a bitmap file to the printer or customer display, for example. • USB device driver This driver
  • Epson TM T88II | Technical Reference - Page 41
    TM-T88II/T88III Technical Reference Guide • Sample programs Sample programs for VB, VC++ can be installed. 3.1.2.3 EPSON OPOS ADK support environment ❏ Supported interfaces • Serial, parallel, USB, Ethernet ❏ Supported OSes (with confirmation of system operation) • Windows 95 Standard, OSR 2.5 •
  • Epson TM T88II | Technical Reference - Page 42
    www.epson-pos.com/ Select the product name from the "Select any product" pull-down menu. 3.1.4.1 IP address setup utility for UB-E02 This utility and its detailed manual for developers allow you to set an IP address for a 10Base-T/ 100Base-TX Ethernet interface installed in the TM printer. Customers
  • Epson TM T88II | Technical Reference - Page 43
    TM-T88II/T88III Technical Reference Guide 3.3 Panel LEDs and Error Status 3.3.1 Power LED Table 3-1 3.3.3 Error LED Table 3-3 Error LED Item Specifications LED color Red On states Off Printer is performing regular operations or is online. On Offline (excluding self-test with the paper
  • Epson TM T88II | Technical Reference - Page 44
    normal or the cover is correctly closed. ❏ A recoverable error recovers by resetting the printer or sending a command from the driver after the cause of the error is eliminated. ❏ For unrecoverable errors, the printer or the power supply may be malfunctioning and must be repaired. Automatically
  • Epson TM T88II | Technical Reference - Page 45
    TM-T88II/T88III Technical Reference Guide Note: The error recovery command is valid only if a recoverable error (excluding automatically recoverable errors) occurs. If a recoverable error occurs, the printer recovers from the error upon receipt of an error recovery command from the driver after the
  • Epson TM T88II | Technical Reference - Page 46
    In this case, double printing and printing position shift may occur. When a cover open error occurs, we recommend clearing the printer's print buffer by sending the error recovery command from the driver, and resending the print data. Note: Whether the cover is open or not does not affect the status
  • Epson TM T88II | Technical Reference - Page 47
    TM-T88II/T88III Technical Reference Guide 3.4.3 Offline This printer is not equipped with an online/offline switch. The printer automatically goes offline under the following conditions: • During power on (including resetting with the interface) until the printer is ready • When the printer is
  • Epson TM T88II | Technical Reference - Page 48
    the paper FEED button 3.5 NVRAM (Non-volatile Memory) NVRAM is mounted on this printer, and bitmap images (for example, business logos) or other data are written to the OPOS, Advanced Printer Driver, and ESC/POS command documentation, respectively. 3-12 Application Development Information Rev. A
  • Epson TM T88II | Technical Reference - Page 49
    TM-T88II/T88III Technical Reference Guide 3.7 Operating Mode (Switch Panel Operation) The printer has a self-test mode to check printer settings in addition to the regular print mode. 3.7.1 Self-test Mode In the self-test mode, the following items are checked and printed out: • Control
  • Epson TM T88II | Technical Reference - Page 50
    1. Look for information relating to your inquiry or problem in the questions. 2. Then, follow the instructions described in the "A" sentence below it. 3.8.1 • Data length You can check printer settings as follows: 1. Run a self-test to check the printer's serial communication conditions. (See page
  • Epson TM T88II | Technical Reference - Page 51
    TM-T88II/T88III Technical Reference Guide 3.8.2 Q: Why does the drawer kick-out not operate properly? A: Drawer specifications differ depending on the manufacturer and the part higher. (*3) NOTES (*1) (*2) (*3) Operating the printer with incorrectly installed devices voids the warranty.
  • Epson TM T88II | Technical Reference - Page 52
    3-16 Application Development Information Rev. A
  • Epson TM T88II | Technical Reference - Page 53
    TM-T88II/T88III Technical Reference Guide Chapter 4 ESC/POS Command-related Information This chapter introduces the printer operation settings, which can be made by using ESC/POS commands, and precautions for those operation settings. 4.1 NV Memory (Non-volatile Memory) The printer's NV memory can
  • Epson TM T88II | Technical Reference - Page 54
    Programming Guide." • Automatic status back (ASB): When a status request is processed as a regular command, the printer automatically this allows you to make sure that data has been sent correctly to the TM printer by comparing the printed result with the program. Follow the steps below to
  • Epson TM T88II | Technical Reference - Page 55
    TM-T88II/T88III Technical Reference Guide 5.1 Product Specifications (TM-T88II/TM-T88III) Table 5-1 Specifications Print method Thermal Cut type Partial cut (left-most one point uncut) Maximum paper thickness 100 µm or less for the manual cutter Character sets TM-T88III: TM-T88II downloaded
  • Epson TM T88II | Technical Reference - Page 56
    Print Specifications (TM-T88II/TM-T88III) Table 5-2 Print characteristics Characteristics Specifications Print method Thermal line printing the print speed automatically changes with the voltage applied to the printer and with the head temperature conditions. Note: The print speed sometimes
  • Epson TM T88II | Technical Reference - Page 57
    TM-T88II/T88III Technical Reference Guide 5.3 Character Specifications (TM-T88II/TM-T88III) Table 5-5 Character specifications Item Specifications Character type Alphanumeric 95 character sets International TM-T88III: 37 types TM-T88II 32 types Extended graphics TM-T88III: 128 characters
  • Epson TM T88II | Technical Reference - Page 58
    5.5 Printable Area (TM-T88II/TM-T88III) Printable area Print direction Roll paper width Figure 5-1 Printable area Table 5-7 Dimensions a (roll paper width) 79.5 ± 0.5 57.5 ± 0.5 (factory option) * Units: mm b (left margin) 3.7 3.7 c (print width)
  • Epson TM T88II | Technical Reference - Page 59
    TM-T88II/T88III Technical Reference Guide 5.6 Print Position versus Cutter Position (TM-88II/TM88III) The following illustration shows the relationship between print position and cutter position. Manual cutter position Autocutter blade position Cut position Print direction Final line of previous
  • Epson TM T88II | Technical Reference - Page 60
    5.7 Overview of External Dimensions (TM-T88II/TM-T88III) 5.7.1 External Dimensions The dimensions in the figure below are common to both the TM-88III and TM-88III. ❏ Height 148 mm {5.83"} ❏ Width 145 mm {5.71"} ❏ Depth 195 mm {7.68"} ❏ Weight Approx. 1.8 kg {3.97 lb} (without roll paper)
  • Epson TM T88II | Technical Reference - Page 61
    TM-T88II/T88III Technical Reference Guide 5.8 Operating Specifications (TM-T88II/TM-T88III) Table 5-8 Temperature and humidity Item Specifications Temperature/ Humidity Operating: 5 to 45°C (41 to 113°F), 10 to 90% RH no condensation allowed. (Refer to ambient operating
  • Epson TM T88II | Technical Reference - Page 62
    5-8 Product Specifications Rev. A
  • Epson TM T88II | Technical Reference - Page 63
    Appendix A Interfaces and Connectors TM-T88II/T88III Technical Reference Guide A.1 RS-232 Serial Interface A.1.1 or more bits However, the stop bit for data transfer from the printer is fixed to 1 bit. Connector Printer side DSUB 25-pin (female) connector Rev. A Interfaces and Connectors A-1
  • Epson TM T88II | Technical Reference - Page 64
    cases: • During the period from when power is turned on to when the printer is ready to receive data. • During the self-test. 25 INIT Input DIP SW2-8 enables this signal to be used as a reset signal for the printer. The printer is reset if the signal remains at SPACE for a pulse width of 1 ms
  • Epson TM T88II | Technical Reference - Page 65
    TM-T88II/T88III Technical Reference Guide A.1.4 Code The hexadecimal numbers corresponding to the XON/XOFF codes are shown below. ❏ XON code: 11H ❏ XOFF code: 13H Note: When the printer goes from offline to online and the receive buffer is full, XON is not transmitted. When the printer goes from
  • Epson TM T88II | Technical Reference - Page 66
    the host proceeds in the nibble or byte mode. This mode allows data transfer from an asynchronous printer under the control of the host. Data transfers in the nibble mode are made via the existing control lines in units of four bits (a nibble).
  • Epson TM T88II | Technical Reference - Page 67
    TM-T88II/T88III Technical Reference Guide A.2.2 Interface Signals Table A-5 Connector pin assignments Pin Source 1 Host 2 Host/Ptr 3 Host/Ptr 4 Host/Ptr 5 Host/Ptr 6 Host/Ptr 7 Host/Ptr 8 Host/Ptr 9 Host/Ptr 10 Printer 11 Printer 12 Printer 13 Printer 14 Host 15 16
  • Epson TM T88II | Technical Reference - Page 68
    Note: A signal name with a rule above it indicates an "L" active signal. Bidirectional communications cannot take place, unless all signal names for both sides correspond to each other. Connect all signal lines using a twisted-pair cable. Connect the return side to the signal ground level. Make sure
  • Epson TM T88II | Technical Reference - Page 69
    Appendix B Options and Consumables TM-T88II/T88III Technical Reference Guide B.1 Roll Paper The table below shows the roll paper specifications. Table B-1 Paper specifications Type of paper Specified thermal paper Shape Roll Paper width Select from the following: ❐ 79.5 mm ± 0.5 mm (
  • Epson TM T88II | Technical Reference - Page 70
    conditions: • Safety standard product • Plug with PE terminal ❏ The AC cable is not packed with this printer. B.2.2 PS-180 (Current Product for Printers) B.2.2.1 Electrical characteristics ❏ Input conditions Input voltage (rating): Frequency (rating): Power consumption (rating): 90 to 264 VAC
  • Epson TM T88II | Technical Reference - Page 71
    TM-T88II/T88III Technical Reference Guide ❏ Output conditions Output voltage (rating): Output current (rating): Output electric power (rating): Output peak current: 24 VDC ± 5% 2.0 A 48 VA 4.5 A B.2.2.2 Case specifications ❏ Dimensions: ❏ Weight: ❏ Material: ❏ Color:
  • Epson TM T88II | Technical Reference - Page 72
    B-4 Options and Consumables Rev. A
  • Epson TM T88II | Technical Reference - Page 73
    Appendix C Character Code Tables TM-T88II/T88III Technical Reference Guide C.1 Page 0 (PC437: USA, Standard Europe) (International character set: when "America" is selected) DC 4 Note: The character code tables show only character configurations. They do not
  • Epson TM T88II | Technical Reference - Page 74
    C.2 Page 1 (Katakana) C-2 Character Code Tables Rev. B
  • Epson TM T88II | Technical Reference - Page 75
    C.3 Page 2 (PC850: Multilingual) TM-T88II/T88III Technical Reference Guide Rev. B Character Code Tables C-3
  • Epson TM T88II | Technical Reference - Page 76
    C.4 Page 3 (PC860: Portuguese) C-4 Character Code Tables Rev. B
  • Epson TM T88II | Technical Reference - Page 77
    C.5 Page 4 (PC863: Canadian-French) TM-T88II/T88III Technical Reference Guide Rev. B Character Code Tables C-5
  • Epson TM T88II | Technical Reference - Page 78
    C.6 Page 5 (PC865: Nordic) C-6 Character Code Tables Rev. B
  • Epson TM T88II | Technical Reference - Page 79
    C.7 Page 16 (WPC1252) (TM-T88III only) TM-T88II/T88III Technical Reference Guide Rev. B Character Code Tables C-7
  • Epson TM T88II | Technical Reference - Page 80
    C.8 Page 17 (PC866: Cyrillic #2) (TM-T88III only) C-8 Character Code Tables Rev. B
  • Epson TM T88II | Technical Reference - Page 81
    TM-T88II/T88III Technical Reference Guide C.9 Page 18 (PC852: Latin2) (TM-T88III only) Rev. B Character Code Tables C-9
  • Epson TM T88II | Technical Reference - Page 82
    C.10 Page 19 (PC858: Euro) C-10 Character Code Tables Rev. B
  • Epson TM T88II | Technical Reference - Page 83
    C.11 Page 255 (Blank Page) TM-T88II/T88III Technical Reference Guide UD: undefined Rev. B Character Code Tables C-11
  • Epson TM T88II | Technical Reference - Page 84
    C.12 International Character Set Country America France Germany UK Denmark I Sweden Italy Spain I Japan Norway Denmark II Spain II Latin America Korea ASCII codes (base 16) C-12 Character Code Tables Rev. B
  • Epson TM T88II | Technical Reference - Page 85
    4. Conditions for canceling receive buffer BUSY state * 5. Supported character sets (extended graphics) * 6. Driver (EPSON OPOS ADK, Advanced Printer Driver ) TM-T88III Approx. 150 mm/s {5.91"/s} (4.72") maximum Average approx. 1.8 A TM-T88II Approx. 120 mm/s {4.72"/s} (4.72") maximum Average
  • Epson TM T88II | Technical Reference - Page 86
    D-2 TM-T88II/TM-88III Comparison Table Rev. A
  • Epson TM T88II | Technical Reference - Page 87
  • Epson TM T88II | Technical Reference - Page 88
    EPSON SEIKO EPSON CORPORATION Printed in Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
TM-T88II/T88III
Technical reference
guide
English
405227700
EPSON