Epson WorkForce Pro EC-4040 Start Here - Installation Guide
Epson WorkForce Pro EC-4040 Manual
 |
View all Epson WorkForce Pro EC-4040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce Pro EC-4040 manual content summary:
- Epson WorkForce Pro EC-4040 | Start Here - Installation Guide - Page 1
EC-4020/EC-4030/EC-4040 Series Start Here 2 Lift up the scanner unit until it locks and remove all protective materials from inside the product. IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Note: This printer - Epson WorkForce Pro EC-4040 | Start Here - Installation Guide - Page 2
not touch the flat, white cable. 2 Gently shake the ink cartridges. 3 Unpack the ink cartridges. 6 Lower the scanner unit. 7 If prompted, follow the instructions on the LCD screen. The printer starts charging the ink. Ink charging takes approximately 5 minutes. When you see a completion message - Epson WorkForce Pro EC-4040 | Start Here - Installation Guide - Page 3
www.epson.ca/support/gcp (Canada) for instructions. Firmware Update Notice: Epson periodically provides firmware updates to address issues of security, performance, minor bug fixes and ensure your printer functions as designed. Your printer was designed to work only with genuine Epson ink cartridges - Epson WorkForce Pro EC-4040 | Start Here - Installation Guide - Page 4
specifically for Epson printers. Find specialty papers and Epson Genuine Ink at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). EC-4020/EC-4030/EC-4040 replacement ink cartridges Color Standard-capacity High
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Note:
This printer is designed for use with Epson
®
cartridges only,
not third-party cartridges or ink. For important ink information, visit
www.epson.com/epsonink
(U.S.) or
www.epson.ca/epsonink
(Canada)
or see your printer box.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
The illustrations show the EC-4040, but the steps are the same for
all models, unless otherwise specified.
1
Unpack
Note:
Do not open the ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit until it locks and remove all
protective materials from inside the product.
3
Lower the scanner unit.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Raise the control panel and turn on the product.
3
Select your language, country, and time.
Note:
You can change these settings later using the product’s
control panel. For more information, see the online
User’s Guide
.
EC-4020/EC-4030/EC-4040 Series