Epson WorkForce Pro WF-C5790 Users Guide for U.S. and Canada - Page 240

2. Select Settings > General Settings > Fax Settings > Fax Setting Wizard. You see the following screen: 3. Connect your phone line and select Proceed 4. On the next screen, use the displayed keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. Select OK when complete. 5. On the next screen, use the displayed keypad to enter your fax number, up to 20 characters. Select OK when complete. Note: The name and phone number in the fax header identifies the source of the faxes you send. 6. On the Distinctive Ring Setting screen, do one of the following: • If you have subscribed to a distinctive ring service from your telephone company, select Proceed. Select the ring pattern to be used for incoming faxes. • If you do not have a distinctive ring service, select Skip. Note: Distinctive ring services allows you to have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in the Distinctive Ring Setting. If you select a ring pattern other than All, Receive Mode is automatically set to Auto. 7. On the Receive Mode Setting screen, do one of the following: • If you have connected an external telephone or answering machine to the product, select Yes. 240