Epson WorkForce Pro WF-C8690 Users Guide - Page 377
LCD screen message, Condition/solution, Paper Setup Auto Display, Line Type, Dial Tone Detection
View all Epson WorkForce Pro WF-C8690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 377 highlights
LCD screen message Condition/solution Maintenance Roller in XX is nearing the end of its service life. The maintenance rollers need to be replaced periodically for optimal performance. (Paper may not feed correctly from the paper cassette or rear paper feed when a maintenance roller is near the end of its service life.) Maintenance Roller in XX is at the Replace the maintenance rollers and reset the maintenance end of its service life. Replace it and roller counter for the paper cassette for which you replaced the reset the maintenance roller counter. maintenance rollers. You need to replace Ink Cartridge(s). Replace the indicated ink cartridges. The time for maintenance is approaching. Contact Epson Support. Do not attempt to perform maintenance on your own. Contact Epson for support. This printer may need service to keep print quality. Contact Epson Support. Do not attempt to perform maintenance on your own. Contact Epson for support. Paper Setup Auto Display is set to Off. Some features may not be available. For details, see your documentation. AirPrint is not available when the Paper Setup Auto Display setting is disabled. Set the Paper Setup Auto Display setting to On. No dial tone is detected. Make sure the phone cable is connected correctly and the phone line works. If you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change the Line Type setting to PBX. If you still cannot send a fax, turn off the Dial Tone Detection setting. (Turning off the Dial Tone Detection setting may cause the product to drop the first digit of a fax number.) Failed to receive faxes because the Press the Job/Status button, select Printer Status, and fax data capacity is full. Touch the resolve any printer errors that prevented faxes from printing. Job/Status at the bottom of the Home Make sure the product is connected to a computer or that a USB Screen for details. device is connected to the product. The combination of the IP address There is a problem with the network connection to your product. and the subnet mask is invalid. See Set up your product on the network again. your documentation for more details. 377