Epson WorkForce Pro WF-M5299 Users Guide for Latin America - Page 169
Caution, Print Nozzle, Check Pattern, Print, Print head is clean, Finish, Clean, Parent topic
View all Epson WorkForce Pro WF-M5299 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not be able to print. 6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and click Print. 7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning • If there are no gaps, click Finish. • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing. Then try cleaning the print head again. If quality still does not improve, contact Epson. Parent topic: Print Head Cleaning 169
169
Caution:
Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
6.
When the cleaning cycle is finished, you can check to see if the nozzles are clean; click
Print Nozzle
Check Pattern
and click
Print
.
7.
Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click
Finish
.
• If there are gaps or the pattern is faint, click
Clean
to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing. Then try cleaning the print head again. If quality still does not improve, contact Epson.
Parent topic:
Print Head Cleaning