Epson WorkForce Pro WF-R8590 User Manual - Page 406

Note: When answering a call that is a fax, wait until the product's LCD screen displays a message that a connection has been made before you hang up. Parent topic: Solving Faxing Problems Related tasks Connecting a Telephone or Answering Machine Using the Fax Setup Wizard Fax Memory Full Error Appears If you see an error message telling you that the product's fax memory is full, try these solutions: • If you set the product to save received faxes in the product's memory or inbox, delete any faxes you have already read. • If you set the product to save received faxes on a computer, turn on the selected computer. Once the faxes are saved on the computer, they are deleted from the product's memory. • If you set the product to save received faxes on a memory device, connect the selected memory device containing the save fax folder, to the product. Once the faxes are saved on the memory device, they are deleted from the product's memory. Note: Make sure the memory device has enough available memory and is not write protected. • If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your faxes in smaller batches. • If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax. Parent topic: Solving Faxing Problems Related references Output Settings - Fax Fax Sending Options Related tasks Viewing a Fax on the LCD Screen Sent Fax Quality is Poor If the sent fax quality is poor, try these solutions: • Clean the scanner glass. 406