Epson WorkForce WF-2760 User Manual - Page 172

Parent topic: Setting Up Fax Features Using the Product Control Panel Receive Settings - Fax Set the receive options you want to use for incoming faxes. Setting Receive Mode Distinctive Ring Rings to Answer Remote Receive Options Manual Auto All Single Double Triple Double&Triple 1 to 9 Off On Start Code Description Lets you confirm whether an incoming fax should be printed; a telephone must be connected to the product. Automatically receives and prints faxes. If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. All works for phone lines that do not use this service. Sets the number of rings before your product receives a fax. If Receive Mode is set to Auto and an answering machine is connected to the product, make sure this setting is set higher than the number of rings your answering machine is set to for answering a call. Lets you start receiving faxes using your phone instead of operating the product (if the Receive Mode is set to Auto). When you enable this function, you need to set a Start Code. If you are using a cordless handset whose base is connected to the product, you can start receiving the fax by entering the code on the handset. Parent topic: Setting Up Fax Features Using the Product Control Panel Security Settings - Fax Set the security options you want to use for fax data. 172