Epson WorkForce WF-2760 User Manual - Page 229
Print Head Alignment, Aligning the Print Head Using the Product Control Panel
View all Epson WorkForce WF-2760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
If you don't see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. Parent topic: Print Head Cleaning Related tasks Cleaning the Print Head Using the Product Control Panel Checking the Nozzles Using the Product Control Panel Removing and Installing Ink Cartridges Print Head Alignment If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning. Aligning the Print Head Using the Product Control Panel Aligning the Print Head Using a Computer Utility Parent topic: Adjusting Print Quality Aligning the Print Head Using the Product Control Panel You can align the print head using the control panel on your product. 1. Load a few sheets of plain paper in the cassette. 2. Press the home button, if necessary. 3. Select Setup. 4. Select Maintenance. 229