Fisher and Paykel CDV3-304H-N Installation Guide - Page 8

CABINETRY DIMENSIONS CLEARANCES The below clearances apply to both wall and island installations for all models. Ensure the cook surface sits flush or above the adjacent countertop and any openings behind or under the cooktop are sealed. Flow of combustion and ventilation air must not be obstructed. COOKTOP OVER OVEN • Ensure the regulator position is clear of installation combination. Refer to 'Gas Connection Considerations for regulator dimensions. • OB30SPPTX1 models require a sealed cavity. When installing under a CDV3 cooktop, the cooktop will act as a part of the overall oven cavity. C A B C A c b A CLEARANCE DIMENSIONS A Min. distance from side of cooktop to nearest: z vertical combustible surface B Min. distance from cook surface to overhead: z combustible surface z non-combustible surface C Min. distance between countertop and cabinet ALL MODELS IN MM 12 305 36 914 30 762 18 457 Non-combustible surfaces: as defined in 'National Fuel Gas Code' (ANSI Z223.1, Current Edition). Clearances from noncombustible materials are not part of the ANSI Z21.1 scope and are not certified by UL. Clearances of less than 6" (152mm) must be approved by the local codes and/or by the local authority having jurisdiction. CLEARANCE DIMENSIONS A Min. clearance under countertop B Height of counter C Min. height from countertop to oven front ALL MODELS IN MM 4 7/16 112 36 914 4 1/16 103 OB30SPPTX1 illustrated. For all other install combinations refer to the technical information provided for chosen oven. 8