Fisher and Paykel RF201ADUSX5 User Guide - Page 14

like Diagram 11 - parts

Get Fisher and Paykel RF201ADUSX5 PDF manuals and user guides View all Fisher and Paykel RF201ADUSX5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

US 12 Installation instructions CA 11 Attach double sided foam to the back of the water filter head as shown in PART: 838587 6 7 DRAWING: 838587 8 9 Diagram 5. Write the date to be replaced on the filter (date installed + 6 months). Remove the double sided foam backing PART:838587 6 7 and attach the filter to the desired position, reinforcing the filter with the Diagram 5 DRAWING: 838587 Fig.78 Double sided 9 foam attachment screws provided as located in step 10 (refer to the previous page). 12 Run the ¼" (6 mm) tubing to the back of the refrigerator ensuring there is enough tubing to pull the refrigerator out for service. 13 Using the measurement guide located on the rear compartment cover as shown6 in PART:838587 7 DRAWING: 838587 8 9 Diagram 6. Mark out 5/8" (16 mm), on the end of the tubing as shown in Diagram 7. Diagram 6 14 Insert the tubing marked 5/8" (16 mm) into the water (solenoid) valve up to the marked line as shown in Diagram 8. 15 Pull gently on tubing to ensure it is locked in as shown in Diagram 9. 16 The completed installation should look like Diagram 11 on page 13. 17 Turn the isolating faucet on and check that all connections are dry and free of Diagram 7 drips. 18 Coil water line tubing behind the refrigerator. Push your refrigerator into place being careful not to kink or squash the water line tube running into the water (solenoid) valve. 19 Read pages 13 - 14 carefully and then turn refrigerator on. Diagram 8 Diagram 9 Fig.8 Waterline connection to refrigerator

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
12
Installation instructions
11
Attach double sided foam to the back
of the water filter head as shown in
Diagram 5. Write the date to be replaced
on the filter (date installed + 6 months).
Remove the double sided foam backing
and attach the filter to the desired
position, reinforcing the filter with the
screws provided as located in step 10
(refer to the previous page).
12
Run the ¼” (6 mm) tubing to the back of
the refrigerator ensuring there is enough
tubing to pull the refrigerator out for
service.
13
Using the measurement guide located on
the rear compartment cover as shown in
Diagram 6. Mark out µ/¸” (16 mm), on the
end of the tubing as shown in Diagram 7.
14
Insert the tubing marked µ/¸” (16 mm)
into the water (solenoid) valve up to the
marked line as shown in Diagram 8.
15
Pull gently on tubing to ensure it is locked
in as shown in Diagram 9.
16
The completed installation should look
like Diagram 11 on page 13.
17
Turn the isolating faucet on and check
that all connections are dry and free of
drips.
18
Coil water line tubing behind the
refrigerator. Push your refrigerator into
place being careful not to kink or squash
the water line tube running into the water
(solenoid) valve.
19
Read pages 13 – 14 carefully and then
turn refrigerator on.
Diagram 5
Fig.7 Double sided
foam attachment
US
CA
Fig.8 Waterline connection to refrigerator
Diagram 9
Diagram 6
Diagram 7
Diagram 8