Fisher and Paykel WA37T26G User Guide - Page 28

Changing Pre-Set Options Out of Balance Recovery Routine When your Ecosmart™ is spinning it can sense if the wash load is out of balance and will stop and re-try spinning up to 3 times. If the machine still senses an unbalanced load there are two options the machine offers. Automatic Recovery Option: Your Ecosmart™ will try to automatically correct the out of balance load. It will fill with water and agitate to redistribute the load before trying to spin up again. Out of Balance Recovery Options Regular Light on = automatic recovery Light off = machine stops Machine Stops Option: Your Ecosmart™ will stop, giving a short burst of beeps every five seconds and the RINSE or SPIN light will flash. You must redistribute the load more evenly yourself. (Use this option if you wish to conserve water.) 1 Enter the Option Adjustment Mode. 2 Use the REGULAR button to select the Out of Balance Recovery Option you prefer. 3 Press Power to store your selection. Auto Water Fill Level If you are not satisfied with the level that your Ecosmart™ fills to on AUTO WATER LEVEL, you can alter the fill level that Auto will select. If you feel there is too much water, you can decrease the fill level that will be selected. 1 Enter the Option Adjustment Mode. 2 Use the CYCLE buttons to decrease the amount of water selected. 3 Press POWER to store your selection. Less Water More Water Automatic Water Level Adjustment Adjust the water level one setting at a time. Note: Heavy Duty (the default setting) provides the ideal water fill level. If you wish to change it, we recommend changing one setting at a time until you reach the preferred level. 28