Fluke 1552A-12 User Manual - Page 18
Display Resolution, RS232 Communication, Ohms Display, Start or Stop Data Logging
View all Fluke 1552A-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1551A/1552A Ex Users Manual Display Resolution Display resolution is the number of digits to the right of the decimal point. The settings are 0.1, 0.01, or 0.001. K Change the resolution setting to the subsequent item in the list, cycling from the last to the first. L Change the resolution setting to the previous item in the list, cycling from the first to the last. C Exit back to menu item. RS232 Communication The baud rate can be set to 2400 or 9600. K Change the RS232 communication setting in the list, cycling from the last to the first. L Change the RS232 communication setting to the previous item in the list, cycling from the first to the last. C Exit back to menu item. Ohms Display The Primary Display shows the resistance of the sensor. The secondary data field displays "OHMS". C is inactive. Note The Data Logging functions that follow are only functional in Products that were purchased with option Data Logging configuration (e.g. 155X-D-X). Start or Stop Data Logging Logging status messages are: FULL the data logging memory is full OFF not presently logging data ON presently logging data Push C to change the logging status. Push K and L if not currently logging data, to choose between START and OFF. If presently logging data, choose between STOP and ON. The current data logging mode is not changed until C is pushed. C Stop or start data logging. Display Free Log Memory Initially, the primary data field shows the percentage of log memory. This display can be toggled to show the number of free records and is updated continually during data logging to show the current memory capacity. Push C to toggle between the two data displays. 10