Fluke 1552A-12 User Manual - Page 21
Battery Life, Calibration, SCPI Commands, RS-232 Interface
View all Fluke 1552A-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Stik Thermometer SCPI Commands Battery Life Battery life is approximately 300 hours (12.5 days) of continuous operation with the backlight off. A low-battery icon (E) shows in the lower right of the display when battery level is low. Replace batteries per recommendations found in the specifications section of this manual. Calibration For calibration information, refer to the document on the documentation CD. SCPI Commands For a list of the SCPI commands, refer to the document on the documentation CD. RS-232 Interface An RS-232 interface is standard on the Product. Serial communication can be used for configuration, calibration, and to move measurement data from the Product. An RS-232 cable is included with data logging software purchase. XWWarning To prevent possible electrical shock, fire, or personal injury, the RS-232 interface must not be used in hazardous areas. Specifications (Ambient: 23 °C ±5 °C) Measurement Range 1551A Ex 50 °C to 160 °C (−58 °F to 320 °F) 1552A Ex 80 °C to 300 °C (−112 °F to 572 °F) Accuracy (1 year 0.05 °C (0.09 °F) Resolution Selectable (0.1, 0.01, 0.001) factory default is 0.01 Sample Rate User selectable 0.5/sec, 1/sec or 2/sec factory default is 1/sec Operating Temperature Range of Readout 10 °C to 50 °C (14 °F to 122 °F) Probe Response Time Approximately 20 seconds EMC Compliance EN61326:2006 Annex C CISPR 11, Edition 5.0-2009 Class "B" Humidity Range 0 to 95 % RH Non-condensing Storage Temperature Range 20 °C to 60 °C (−4 °F to 140 °F) Enclosure Rating IP50 Readout Temperature Coefficient Add ±10 ppm/°C of full scale temperature from −10 °C to 18 °C and 28 °C to 50 °C Probe Temperature Coefficient 0.00385 Ω/Ω/°C nominal Nominal Probe Resistance at 0 °C 100 Ω Probe Hysteresis 0.01 °C Power 3 AAA alkaline batteries (Must use only approved batteries. See Table 2) 13