Fluke 355 Fluke 353 & 355 Users Manual - Page 21
Measuring Resistance (355 only), Connect the black test lead to
View all Fluke 355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Measuring Resistance (355 only) XW Warning To avoid possible electric shock or personal injury, when measuring resistance in a circuit, make sure the power to the circuit is turned off and all capacitors are discharged. To measure resistance: 1. Turn the rotary function switch to e. 2. Remove power from the circuit being tested. 3. Connect the black test lead to the COM terminal and the red test lead to the V terminal. 4. Measure the resistance by touching the probes to the desired test points of the circuit. 5. View the reading on the display. See Figure 8. XW Warning To avoid electrical shock or personal injury, be aware that dangerous voltages may be present at the input terminals and may not be displayed Clamp Meter Using the Meter 355 AC/DC CLAMP METER Auto Range 2000 A TRUE RMS 600 V CAT A OFF A AC+DC A V V VAC+DC RANGE HOLD ZERO INRUSH Hz MIN MAX FILTER COM V 600 V CAT 1000 V CAT Figure 8. Measuring Resistance fbq08.eps 13