Foscam FR305 _USER GUIDE - Page 30
Example, WISP Mode
View all Foscam FR305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Wireless N300 High power Router 2.3 Access Control The Access Control feature allows you to specify a list of devices to Permit or Forbid a connection to your wireless network via the devices' MAC addresses. All other devices not listed as Permitted will be Forbidden and vice versa. 1. Select the wireless network (SSID) you wish to enable Access Control on. 2. MAC Address Filter: Select Permit or Forbid from the drop-down list. 3. To permit a wireless device to connect to your wireless network, select Permit, enter its MAC address, click Add and then OK. Then only this device listed as "Permitted" will be able to connect to your wireless network; all other wireless devices will forbidden. Example: To forbid the PC at the MAC address of C8:3A:35:65:82:E6 from connecting to your wireless network, do as follows: Step1. Select an SSID, say, Foscam_C8DA90. Step2. Select Forbid from the corresponding drop-down menu. Step3. Enter C8:3A:35:65:82:E6 in the MAC address box and click Add. Step4. Click OK to save your settings. You can add more wireless MAC addresses you wish to forbid. 2.4 Wireless Extender WISP Mode If your router acquires Internet access from a wireless Access Point, please select WISP mode. Specific steps are as follows: 1. Click Wireless>Wireless Extender, select WISP mode and click Open Scan. 2. 3