Foxconn G31M English Manual. - Page 33

Smart BIOS Phoenix - AwardBIOS CMOS Setup Utility Smart BIOS Smart Power LED [Enabled] Item Help Smart Boot Menu [Disabled] Current CPU Speed 1866MHz Menu Level ► Current FSB Speed 1066MHz Current CPU Multiplier 7 Smart Debug LED Current DRAM Speed 800MHz function within Power� LED 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power On System Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Normal No Memory No Display Post Error Message No CPU Fan Power LED Status Always On Continue blinking On (1sec.), Off (1sec.) Continue blinking On (2sec.), Off (2sec.) Quick blinking twice (1/3sec. On, 1/3sec. Off), one long On (1sec.), continuously. Continue blinking On (1/2sec.), Off (1/2sec.) Stop Blinking Condition Always On Reboot & Memory OK Reboot & Display OK Enter Setup or Skip Reboot & Fan OK ► Smart Boot Menu When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also prevents user without password trying to get into your computer through smart boot menu. ► Current CPU Speed This item displays the current CPU speed. ► Current FSB Speed This item displays the current Front Side Bus speed. ► Current CPU Multiplier This item displays the current CPU Ratio. ► Current DRAM Speed This item displays the current DRAM speed. 26