Foxconn G31M English Manual. - Page 50
CPU Vcore/+ 3.3V/+5V/+12V/VDDR, CPU/System Temperature, Smart Fan Control, PWM Start Temperature,
View all Foxconn G31M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3 PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Case Open Warning [Disabled] Item Help Shutdown Temperature [Disabled] CPU Vcore 1.20 V Menu Level ► +3.3V 3.39 V +5V 5.02 V +12V 11.84 V VDDR CPU Temperature System Temperature 1.79V 51oC 38oC CPU Fan Speed 2566 RPM System Fan Speed 0 RPM CPU Smart Fan Control [Disabled] PWM Start Temperature [35] Start PWM Value [64] Slope PWM Value [2] Delta Temperature [2] System Smart Fan Control [Disabled] Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Case Open Warning This item is used to enable or disable case open warning function. ► Shutdown Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. ► CPU Vcore/+ 3.3V/+5V/+12V/VDDR The current voltages are automatically detected and displayed by the system. ► CPU/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan Speed The CPU fan/System fan speed are automatically detected and displayed by the system. ► CPU Smart Fan Control This option is used to enable or disable CPU smart fan function. Only when this option is enabled, you can set some correlative parameters. ► PWM S��t�a�r�t�T�e�m��p�e��ra��tu��re� It allows you set a temperature value from which smart fan starts its operation. ► Start PWM Value It allows you to set an initial PWM value to drive the fan when the temperature reaches Start value and smart fan begins its operation. The higher PWM value can achieve the faster fan speed. ► S��lo�p�e��P�W��M��V�a�lu�e� It controls the PWM value being stepped up or down versus temperature changes. ► Delta Temperture It is used to set the delta value for temperature. When change of the temperature reaches plus/minus delta value, then the PWM will be increased or decreased by a step value based on the slope formula. 43