Foxconn G31M English Manual. - Page 45
► ECP Mode Use DMA
View all Foxconn G31M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3 ► OnBoard FDC Controller This item is used to enable or disable the onboard FDC controller. ► OnBoard Serial Port 1 This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 1. ► OnBoard Serial Port 2 This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 2. ► URAT Mode Select This item enables you to determine the mode of the onboard infrared chip. ► IrDA Duplex Mode This item enables you to determine the infrared function of the onboard infrared chip. ► OnBoard Parallel Port This item is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel (or Printer)port 1. ► Parallel Port Mode This item is used to select the operation modes for the onboard parallel (or Printer)port. They are [SPP](default), [EPP], [ECP] and [ECP+EPP] ► ECP Mode Use DMA When "Parallel Port Mode" is set to "ECP" or "ECP+EPP", the item is used to select the channel of ECP mode. 38