Foxconn G45M-S English Manual. - Page 45
► OnBoard Floppy Controller, ► Serial Port1, ► IrDA Function, ► IrDA Duplex Mode, ► OnBoard CIR Port
View all Foxconn G45M-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3 SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. SuperIO Configuration SuperIO Configuration Help Item OnBoard Floppy Controller [Enabled] Allows BIOS to Enable Serial Port1 [Enabled] or disable floppy IrDA Function [Enabled] controller. IrDA Duplex Mode [Half Duplex] OnBoard CIR Port [Disabled] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► OnBoard Floppy Controller This item is used to enable/disable Floppy Controller. ► Serial Port1 This item is used to enable/disable Serial Port 1. ► IrDA Function This item is used to enable/disable onboard infrared chip function. ► IrDA Duplex Mode This item enables you to determine the transfer mode of the onboard infrared chip. ► OnBoard CIR Port This item specifies the base I/O port address of the onboard Consumer IR (CIR) port. The setting values are: [Disabled] (default) ; [3E0] ; [2E0] ; [298] . Set this value to [Disabled] can prevent the Onboard CIR Port from accessing any system resources. When the value of this option is set to [Disabled], the consumer infrared port becomes unavailable. ► OnBoard CIR IRQ When the value of "OnBoard CIR Port" is set to [3E0], [2E0] or [298], this item is used to set the onboard CIR IRQ. 38