Frigidaire FGAC5045W1 Complete Owners Guide - Page 18
used. Make sure there are no kinks or
View all Frigidaire FGAC5045W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 OPERATING INSTRUCTIONS c. Insert the female threaded end of the hose onto the drain connector of the unit. (fig.2) fig. 4 fig. 2 d. Screw the garden hose onto the threaded portion of the drain connector. (fig.3) h. Select the desired humidity setting and fan speed on the unit for continuous draining to start. NOTE 1. Check the seal between the hose and the drain connector. If there is a small leak then replace the hose gasket and re-tighten the hose. 2. It is recommended that a Dehumidifier Drain Hose - 1/2" (12.7 mm) or larger be used. Make sure there are no kinks or elevations in the hose. 3. When a hose is not attached to the drain connector, please ensure drain cap is screwed securely to the connector to prevent leakages. fig. 3 e. Make sure the hose is secure so there are no leaks. f. Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing. g. Place the end of the hose into the drain. (fig.4)