Frigidaire FPID2495QF Complete Owner's Guide - Page 4
FEATURES AT A GLANCE, Operating Instructions - dishwasher model
View all Frigidaire FPID2495QF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
FEATURES AT A GLANCE Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while loading, then fills with water covering the filter area. Water is then pumped through the spray arms. Soil particles go through and across the filter and down the drain as the water is pumped out. This series of steps are repeated as needed. The number of water fills varies with the cycle being used. Features may vary according to model Upper Spray Arm Tub Gasket Cup Shelves Soft Grip Rack Middle Spray Arm Upper Rack Silverware Basket Lower Rack Lower Spray Arm Detergent Dispenser Rinse Aid Dispenser Operating Instructions Getting Started 1. Load Dishwasher (See Preparing and Loading Dishes). 2. Add detergent (See Dishwasher Dispenser & Detergents). 3. Add Rinse Aid, if needed (See Rinse Aid). 4. Select desired CYCLE (See Cycle Chart). 5. Select desired OPTION (See Energy Options). 6. Run hot water faucet nearest dishwasher until water is hot. Turn water off. 7. To start, press START/CANCEL pad and close door. Filter Serial Label (located on right side of door) 4