Frigidaire FPID2495QF Complete Owner's Guide - Page 6
My Favorite Cycle, To Cancel a Cycle, Delay Start, Child Lock Controls, Heat Dry, Air Dry, Sanitize
View all Frigidaire FPID2495QF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
OPERATING INSTRUCTIONS Sanitize Option Delay Start To sanitize your dishes and glassware, select SANITIZE option, by pressing WASH TEMP pad. When selected, the light will come on and remain on until end of cycle. The water temperature in the final rinse will be raised to 155oF (68oC) and will maintain that temperature for 9 minutes. This option is available in Heavy and Normal Cycles. Only these sanitization cycles have been designed to meet NSF requirements. The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120oF (49oC). The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120oF (49oC). To turn off the SANITIZE option, press the Wash Temp pad. The SANITIZE light will turn off. The DELAY START option allows you to automatically delay starting your dishwasher from 1-24 hours. To activate press the DELAY START pad until the desired delay time shows in the STATUS window and press START. To cancel the DELAY START option and begin the cycle before the delay period is over, press the START/CANCEL pad until the status window show cycle duration. Press START/CANCEL again and close the door. Child Lock Controls To prevent children from accidently changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing the DELAY START pad for 3 seconds and releasing. The status window will display "loc". To unlock the controls, press the DELAY START pad until "loc" goes out. Heat Dry The HEATED DRY option in combination with rinse aid will enhance drying performance. HEATED DRY option is available on all cycles. Air Dry The AIR DRY option will reduce temperature in the hot rinse of the selected wash cycle. This option will slightly decrease energy usage but will increase the likelihood that dishware will not be dry. To Cancel a Cycle To cancel a cycle at anytime, open the door and press the START/CANCEL pad until the 1 min drain feature is initiated. Close the door and the drain cycle will begin. You will hear a tone for the start and completion of the drain cycle. When the door is opened, the last cycle selected will be displayed. If desired, a new cycle can now be selected by pressing START/CANCEL pad and upon closing the door the cycle will begin. My Favorite Cycle The MY FAVORITE CYCLE option allows you to program your preferred cycle and options into one button. Once Programmed, simply press the MY FAVORITE CYCLE button followed by the START/ CANCEL pad will select the programmed cycle and options. To Program the MY FAVORITE CYCLE button: 1. Select your preferred cycle and options 2. Hold the MY FAVORITE CYCLE button for 3 seconds. The LED over the MY FAVORITE pad turns on indicating the MY FAVORITE CYCLE option has been programmed. To change the MY FAVORITE CYCLE option simply repeat steps one and two above. 6