Fujitsu 4340C Cleaning & Maintenance - Page 25
Panel Display, Counter Display - scanner parts
UPC - 097564304156
View all Fujitsu 4340C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
DESCRIPTION Panel Display I Counter Display The displays for the Paper and Abrasion counters are shown below: Paper counter Re a d y XXXX XXXXX0 > Abrasion counter Simultaneously press the and arrow buttons for at least 1 second, to switch to Life counter panel display as shown below:The scanner is provided with a counter display. Re a d y * XXXXXX0 > Life counter Counter Function Paper counter When the button is pressed for at least 1 second The paper counter counts the number of scanned sheets from the start of reading until Paper Empty or an error is detected. The counter is automatically reset at the start of reading. The counter is used for checking the number of sheets scanned at one batch. When the button is pressed for at least 1 second This counter increments each time a document is scanned. It is not initialized until the power is turned off. The counter can be used, for example, for checking the number of sheets that have been scanned in one day. Abrasion counter The abrasion counter counts the accumulated number of scanned sheets. This counter increments at every 10 sheets. It is useful to check the cleaning cycle or the parts replacement cycle. How to reset is described in "Operator's Guide". Life Counter Keeps a cumulative count of the number of scans made after shipping. This counter increments by 1 after every 10 scans and may be used to estimate of the device's remaining scan life. NOTE When the counter value is 0, no number is displayed. G 1-7