Fujitsu 5120C Getting Started Guide - Page 11
Installation Of The Scanner - specifications
View all Fujitsu 5120C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 1. Place the scanner at its installation site. For details on the scanner's dimensions and required installation space, refer to "fi-5120C/fi5220C Operator's Guide" "7.2 Installation Specifications" in the Setup CD-ROM. For fi-5120C, go to Step 3. 2. Unlock the Shipping lock. The carrier unit inside the scanner is fixed in place by the shipping lock to prevent the scanner from becoming damaged during transportation from the factory. After transporting and placing the scanner, tilt the scanner (approx. 30 degrees) and release the Shipping lock on the bottom of the scanner. Approx.30 degrees ADF paper chute Tab Side guide 4. Connect the AC adapter. ATTENTION Use only the AC adapter provided by the manufacturer. 1) Connect the AC cable to the AC adapter. Lock Release 2) Connect the AC adapter connector to the scanner's DC inlet. 3. Attach the ADF paper chute. Hold the ADF paper chute and insert its tabs into the corresponding slots in the scanner as shown in the next figure below. The Side guides of the ADF paper chute have to face up. 3) Plug the AC cable into the outlet. The Function Number Display and the LED HINT may flash for an instant when plugging the AC cable into the outlet. fi-5120C/fi-5220C Image Scanner Getting Started 3