Fujitsu 5120C Operator's Guide - Page 29
All Rights Reserved Copyright 2006 © PFULIMITED
View all Fujitsu 5120C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Place one card at a time into the Auto Document Feeder. ID card feeding requires the card to be fed through the Auto Document Feeder in portrait mode as in the following figure. Smooth cards should be placed face down in the Auto Document Feeder. Embossed cards (raised lettering) should be placed with the embossed side down. The card to be scanned should be within the ISO7810 compliance, type ID-1. ISO7810-compliant, Type ID-1 card Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate) Dimensions: 3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm Thickness: 0.03 ± 0.003inch / 0.76 ± 0.08mm Cards that are excessively rigid or less flexible may not feed smoothly and excessive noise may occur. Cards should be clean from oil and without labels. Cards cannot be scanned when the imprinter is installed. 1 2 3 4