Fujitsu A3110 A3110 User's Guide - Page 60
Modem Problems, USB Device Problems, PC Card/ExpressCard Problems, Power Failures - lifebook driver
UPC - 611343053006
View all Fujitsu A3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
falcon.book Page 50 Friday, August 4, 2006 11:12 AM LifeBook A3000 Series Notebook - Section Five Problem Possible Cause Possible Solutions Modem Problems Messages about modem operation. Modem operation messages are generated by whichever modem application is in use. See your application software documentation for additional information. USB Device Problems You have installed a USB device that your LifeBook notebook does not recognize, or the device does not seem to work properly. The device is not properly installed. The device may have been installed while an application was running, so your notebook is not aware of its installation. Remove and reinstall the device. (See Device Ports on page 42 for more information) Close the application and restart your notebook. Your device may not have the See your software documentation and activate the correct software driver active. correct driver. You may have the wrong I/O address selected for the device. See your device documentation and software documentation to determine the required I/O address. Change the settings in the BIOS setup utility. (See BIOS Setup Utility on page 25 for more information) Your device and another device Check all I/O addresses located within the BIOS are assigned the same I/O setup utility and any other installed hardware or address. software to make sure there are no duplications. PC Card/ExpressCard Problems A card inserted in the card slot does not work or is locking up the system. The card is not properly inserted. Remove and re-insert the card. (See PC Cards/ ExpressCards™ on page 38 for more information) The card may have been inserted while an application was running, so your notebook is not aware of its insertion. Close the application and restart your notebook. Your software may not have the correct software driver active. See your software documentation and activate the correct driver. You may have the wrong I/O address selected for your card device. See your card documentation to determine the required I/O address. Change the settings in the BIOS. (See BIOS Setup Utility on page 25 for more information) Your card device and another device are assigned the same I/O address. Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. Power Failures You turn on your LifeBook notebook and nothing seems to happen. The installed primary battery is completely discharged, there is no modular bay battery installed or there is no Power adapter (AC or Auto/Airline) installed. Check the Status Indicator Panel to determine the presence and condition of the batteries. (See Status Indicator Panel on page 11 for more information) Install a charged battery or a Power adapter. 50