Fujitsu A3110 A3110 User's Guide - Page 68
Using The Shock Sensor Utility
UPC - 611343053006
View all Fujitsu A3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
falcon.book Page 58 Friday, August 4, 2006 11:12 AM LifeBook A3000 Series Notebook - Section Five 6. If you have an external DVD drive connected: ■ Select the Advanced menu in the BIOS window. ■ Scroll down to the USB Features submenu and press the Enter key to open it. ■ If Legacy USB Support is disabled, press the space bar to enable it. ■ Scroll down to SCSI SubClass Support and press the space bar to enable it. 7. Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process. After you have changed the boot priority, you can restore a backup image when you are booting up. Procedure 1. Turn on the power to your system. 2. Ensure that you have a device that can read DVDs either installed in your system or attached externally to it. 3. Insert the Restore Disc into the drive tray. 4. Reboot your system. 5. After the system reboots, follow the instructions that appear to either restore your system image or erase all data from your hard disk. USING THE SHOCK SENSOR UTILITY The Shock Sensor Utility is a feature that helps to The Shock Sensor Utility is designed to decrease the risk of damage to the computer's hard disk drive (HDD) in the event of excessive impact or vibration. The Shock Sensor Utility also has the ability to improve the security of the computer by automatically locking the computer with a password when it is carried. Note that the HDD protection and computer locking features are mutually exclusive; both cannot be selected at the same time. ■ Shock Sensor Utility does not completely protect the HDD and does not provide absolute security for the computer. ■ The computer may stop temporarily while the HDD head is retracted. To restart the computer, keep the system horizontal. 1. Double-click the Shock Sensor Utility icon in the Notification Area at the bottom-right of the screen. The [Shock Sensor Utility] window appears. 2. Click the [Setting] button. The [Shock Sensor Utility Settings] window appears. Action Select the action you wish this utility to perform: ■ Protect HDD from impact. HDD head is retracted when an impact to the computer is detected. 58 ■ Lock computer when carried. Lock the computer when it is being carried. ■ Nothing. No action. Sensitivity of impact/horizontal move/fall/carry detection Adjust the sensitivity of the acceleration sensor based on system motion or impact. Ignore periodic vibration. If vibration is periodic, disregard it. Ignore mouse click When the mouse is clicked, sensitivity is temporarily lowered. Ignore keyboard action When the keyboard is used, sensitivity is temporarily lowered. Confirm calibration when user logs on Select [Confirm calibration when user logs on] if you want to recognize the current orientation as horizontal at logon. Perform calibration automatically when user logs on. Select [Perform calibration automatically when user logs on] if the system is normally used on a horizontal surface. [Calibrate Now] The calibration is executed. Please position the computer as horizontally as possible, then click the [Calibrate Now] button. The current horizontal position will be recognized as the true horizontal by performing the calibration. 3. Click the [OK] or [Cancel] button. The [Setup] window closes. Using the Shock Sensor Monitor Window Right-click the Shock Sensor Utility icon in the Notification Area at the bottom-right of the screen, and select [Monitor] from the menu. The Monitor window appears. Note that the Monitor is designed for entertainment, and has no effect on system settings or orientation. To navigate the monitor, use the buttons described below. ■ Advance. Incline the display to the hinge side, or use [Up] key. ■ Back. Incline the display to the mouse-button side, or use [Down] key. ■ Right. Incline the display to the right side, or use [Right] key. ■ Left. Incline the display to the left side, or use [Left] key. ■ Go up. Use [A] key. ■ Go down. Use [Z] key. ■ Close. Use [Esc] key.